Bonjour, I am unable to have the scanner hp5400c working under linux. Here the res= ult of:
*** lsusb: Bus 003 Device 002: ID 03f0:1005 Hewlett-Packard ScanJet 5400c ***** sane-find-scanner: found SCSI scanner "Nikon LS-2000 1.31" at /dev/scanner found SCSI scanner "Nikon LS-2000 1.31" at /dev/sg0 found SCSI scanner "Nikon LS-2000 1.31" at /dev/sga # Your SCSI scanner was detected. It may or may not be supported by SAN= E. Try # scanimage -L and read the backend's manpage. found USB scanner (vendor=3D0x03f0, product=3D0x1005) at /dev/usb/scanner= 0 found USB scanner (vendor=3D0x03f0 [Hewlett-Packard], product=3D0x1005 [H= P Scanjet 5400C Series]) at libusb:003:002 # Your USB scanner was (probably) detected. It may or may not be suppor= ted by # SANE. Try scanimage -L and read the backend's manpage. ********* scanimage -L: device `coolscan2:scsi:/dev/scanner' is a Nikon LS-2000 film = scanner device `coolscan:/dev/sg0' is a Nikon LS-2000 slide scanner SANE_DEBUG_HP5400=3D255 scanimage -L [sanei_debug] Setting debug level of hp5400 to 255. [hp5400] sane_init: SANE hp5400 backend version 1.0-3 (from sane-backends 1.0.14) [hp5400] Reading config file [hp5400] Discarding line 1 [hp5400] Discarding line 2 [hp5400] Discarding line 3 [hp5400] Discarding line 4 [hp5400] Trying to attach usb 0x03f0 0x1005 [hp5400] vendor/product 0x03F0-0x1005 opened [hp5400] Read: reqtype =3D 0xC0, req =3D 0x04, value =3D 1200 [hp5400] Read: reqtype =3D 0xC0, req =3D 0x04, value =3D C500 [hp5400] Command 12 verified [hp5400] Sorry, unknown scanner version. Attempted match on : [hp5400] * 'SilitekIBlizd C3 ScannerV0.84' [hp5400] * 'SilitekIBlizd C3 ScannerV0.86' [hp5400] * 'SilitekIBlizd C3 ScannerV0.87' [hp5400] Version is '' [hp5400] attach_one_device: attached /dev/usb/scanner0 successfully [hp5400] hp5400_open: open returned Device busy [hp5400] hp5400_open failed [hp5400] attach_one_device: couldn't attach libusb:003:002 [hp5400] Discarding line 6 [hp5400] Discarding line 7 [hp5400] Discarding line 8 [hp5400] Discarding line 9 [hp5400] Discarding line 10 [hp5400] Discarding line 11 [hp5400] Discarding line 12 [hp5400] Discarding line 13 [hp5400] Trying to attach /dev/usb/scanner0 [hp5400] vendor/product 0x03F0-0x1005 opened [hp5400] Read: reqtype =3D 0xC0, req =3D 0x04, value =3D 1200 [hp5400] Read: reqtype =3D 0xC0, req =3D 0x04, value =3D C500 [hp5400] Command 12 verified [hp5400] Sorry, unknown scanner version. Attempted match on : [hp5400] * 'SilitekIBlizd C3 ScannerV0.84' [hp5400] * 'SilitekIBlizd C3 ScannerV0.86' [hp5400] * 'SilitekIBlizd C3 ScannerV0.87' [hp5400] Version is '' [hp5400] attach_one_device: attached /dev/usb/scanner0 successfully [hp5400] Discarding line 15 [hp5400] Discarding line 16 [hp5400] sane_get_devices device `coolscan2:scsi:/dev/scanner' is a Nikon LS-2000 film = scanner device `coolscan:/dev/sg0' is a Nikon LS-2000 slide scanner [hp5400] sane_exit ******** The /etc/sane.d/hp5400.conf is: # hp5400.conf # See man sane-hp5400 for a description. # # HP 5400C usb 0x03f0 0x1005 # # HP 5470C #usb 0x03F0 0x1105 # # Device filename to use for scanner access # # Uncomment the following line if autodetection fails # /dev/usb/scanner0 #libusb:003:002 #option connect-device What can I do else? Thank you. -- Fran=E7ois Patte Ecole fran=E7aise d'Extr=EAme-Orient - Pune - Inde Universit=E9 Ren=E9 Descartes - Paris 5 UFR de math=E9matiques et informatique http://www.math-info.univ-paris5.fr/~patte
