> Then your original log is not correct. These lines are from the debug=20
> output that you provided:
>=20
> [epson] sane_init, ># SCSI scanner:<
> [epson] sane_init, >#scsi EPSON<
> [epson] sane_init, >scsi /dev/scanner<
>=20
>=20
> This is the output from grep that you posted:
>=20
> [fbriere] toroia:~ $ grep -v '^#' /etc/sane.d/epson.conf
> scsi EPSON
You have a sharp eye. I originally had compiled out /proc/scsi support
in the kernel, so scanimage's debugging output was complaining about
that. I recompiled the kernel, rebooted, and ran scanimage again, which
is the output I provided. In the meantime, I played a bit with the
config, hence the discrepancy with the earlier commands.
[fbriere] toroia:~ $ grep -v '^#' /etc/sane.d/epson.conf
scsi /dev/scanner
Obviously, I tried both /dev/scanner and EPSON, and they give the same
results (i.e. nothing).
--=20
Fr=E9d=E9ric Bri=E8re <*> [email protected]
=3D> <[email protected]> IS NO MORE: <http://www.abacomsucks.com> <=3D
