Hi Klaus, FedoraCore2
Tks for your advice which I'll try later. But there is something strange happened in this box which I hope to solve first. # modprobe -a sg* WARNING: Module sg* not found. # modprobe /dev/sg1 FATAL: Module /dev/sg1 not found. You have new mail in /var/spool/mail/root # modprobe /dev/sg1 FATAL: Module /dev/sg1 not found. # modprobe /dev/sg0 FATAL: Module /dev/sg0 not found. # modprobe /dev/sg4 FATAL: Module /dev/sg4 not found. # /sbin/insmod /dev/sg4 insmod: can't read '/dev/sg4': No such device or address # /sbin/insmod /dev/sg0 insmod: can't read '/dev/sg0': No such device or address # /sbin/insmod /dev/sg1 insmod: can't read '/dev/sg1': No such device or address # locate modules.conf /etc/vfs/modules/extra-modules.conf /etc/vfs/modules/ssl-modules.conf /etc/vfs/modules/default-modules.conf /etc/gnome-vfs-2.0/modules/default-modules.conf.with-menu-editing /etc/gnome-vfs-2.0/modules/ssl-modules.conf /etc/gnome-vfs-2.0/modules/mapping-modules.conf /etc/gnome-vfs-2.0/modules/default-modules.conf /var/cache/man/cat5/modules.conf.5.bz2 /usr/share/man/man5/modules.conf.5.gz I could not find modules.conf Any advice? TIA B.R. Stephen --- Klaus Dahlke <[email protected]> wrote: > On Mon, 22 Nov 2004 01:18:29 +0800 (CST) > Stephen Liu <[email protected]> wrote: > > > Hi folks, > > > > I have been trying hours failing to make following > > scanner to work again. Previously It worked on > RedHat > > 8 on this box > > > > Alfa SnapScan 310 connected to a ISA SCSI card > > FedoraCore2 > > ================= > > > > This box has another removable hard drive running > > WinME. This scanner is still working on WinME > > > > > > > > # find / -name aha152x/ > > > /lib/modules/2.6.5-1.358/build/include/config/pcmcia/aha152x > > > /lib/modules/2.6.5-1.358/build/include/config/scsi/aha152x > > > /lib/modules/2.6.8-1.521/build/include/config/pcmcia/aha152x > > > /lib/modules/2.6.8-1.521/build/include/config/scsi/aha152x > > 17)insmod aha152x aha152x=0x140,9 > > > > Stephen, > you need to configure the kernel or at least the > module to get build. You need something like > aha152x.ko in > '/lib/modules/2.6.8-gentoo-r4/kernel/drivers/scsi' > directory. > > If it is an ISA card, make sure you switched on ISA > support in the kernel. > > > > > # /sbin/insmod aha152x aha152x=0x140,9,7,0 > > insmod: can't read 'aha152x': No such file or > > directory > > As before: the kernel module hasn't been build or is > not include in the kernel. Ckeck your kernel config, > (re-)compile and it should work. Have alook at the > special documentation > /usr/src/KERNEL/Documentation/scsi/aha152x.txt. > > Cheers, > Klaus > > -- > sane-devel mailing list: > [email protected]
