Hi Oliver, thanks for your immediately answer. Sorry I wrote I'm crazy and that where to yesterday evening. I m copied the filepath at least yesterday because of my confusion from konqueror without control about the correctness. After modifying this I find out that the error depends on my libraries. After compilation, the sane-backends libraries could be find on /usr/local/lib and I have copied all to /usr/local/lib64 because of my AMD x86_64 system. After that the message [snapscan] Downloading /path/to/your/firmware/file.bin [snapscan] Cannot open firmware file /path/to/your/firmware/file.bin. [snapscan] Edit the firmware file entry in snapscan.conf. [snapscan] sane_snapscan_open: download_firmware command failed: Invalid argument [snapscan] sane_snapscan_exit appears. Thereafter I make uninstall my sane-backend then make clean and :/configure --libdir=/usr/local/lib64. I had no problems with compilation and with install it all. But on the next xsane call the same error message above appears. Is it possible to compile sane-backends for x86_64 and wich settings of configure are necessary or must I change the makefile?
Am Freitag, 26. November 2004 22:42 schrieb Oliver Schwartz: > Hi, > > > [snapscan] Downloading file:/usr/local/etc/sane.d/Esfw41.bin > > [snapscan] Cannot open firmware file > > file:/usr/local/etc/sane.d/Esfw41.bin. [snapscan] Edit the firmware > > file entry in snapscan.conf. > > [snapscan] sane_snapscan_open: download_firmware command failed: > > Invalid argument > > [snapscan] sane_snapscan_exit > > Your firmware file entry is incorrect. It should probably be > > firmware /usr/local/etc/sane.d/Esfw41.bin > > (i.e. leave out any "file:" statement, just give the filename with > full path). > > /Oliver
