Hi, I've updated my config files and verified the firmware path (in fact, I=20 had already copied it from the command line).
The scanner seems to be recognized since I got something with=20 sane-find-scanner but I get the following error message with xsane : "Failed to open device 'snapscan:libusb:002:008' : Access to ressource=20 has been denied". Then the scanner is disconnected and if I run xsane again, I got "no=20 devices available'. I've tried with user root (even if it is heavily unadvised) and I got=20 the same messages. Very strange ! Julien BLACHE a =E9crit : > Jean-Christophe VIALLET <[email protected]> wrote: >=20 >=20 >>My epson.conf file contains a single line >>usb >=20 >=20 > The epson backend isn't used for this scanner. >=20 >=20 >>and my snapscan.conf file : >>firmware /mnt/win/windows/system/esfw41.bin >>/dev/usb/scanner0 bus=3Dusb >=20 > ^^^^^^^^^^^^^^^^^^^^^^^^^^^ >=20 > Remove this line, it's not needed. >=20 >=20 >># Epson Perfection >>usb 0x04b8 0x0121 >=20 >=20 > Also, check that the firmware file is found ; depending on the > filesystem you use for windows, it could be case sensitive or not. >=20 > JB. >=20
