the scanner is connected but sane doesn't find it. cat /proc/bus/usb/devices show up with
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D01 Dev#=3D 2 Spd=3D12 MxC= h=3D 0 D: Ver=3D 1.00 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1 P: Vendor=3D03f0 ProdID=3D0401 Rev=3D 1.00 S: Manufacturer=3DHewlett-Packard S: Product=3DHP ScanJet 5200C S: SerialNumber=3DSG0321316ZHT C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D60 MxPwr=3D 0mA I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 Driver= =3D(none) E: Ad=3D81(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 16 Ivl=3D0ms E: Ad=3D83(I) Atr=3D03(Int.) MxPS=3D 1 Ivl=3D250ms What do I do? I use kernel 2.6.7 and hotplug to manage permissions. However hotplug has s= ome=20 problems: It cannot chown and chmod of /proc/bus/usb/001/003 which might be= =20 my scanner device. (I think it should be 001:001). I don't always get this= =20 error message during start-up for some reason. It might be related to my start-up unlinking problems to devices vcs4 and=20 more. =2D-=20 Venlig hilsen / Greetings from Claus Ladekj=E6r Wilson Bellisv=E6nget 18 DK - 5450 Otterup tlf. +45-66191050 / mob. +45-61665543 http://www.clauswilson.dk Linux gentoo 2004.2 kernel 2.6.7
