Hello, On Jun 20 23:40 David Chamberlin wrote: > Currently, Kyocera Mita does not have any planned development for a sane > backend to interface to the native TWAIN network interfaces in our MFPs. It > is something for consideration. ... > Rainer Bendig aka Ny wrote: > > does anyone know if the scanner of the multi-function-printer > > "Kyocera FS-1118 MFP" works with sane?
As the Kyocera FS-1118 MFP looks like a big and fat network printer scanner copier device, the question is whether a SANE driver (i.e. a SANE backend) is really needed to use it with Linux or whether one can use this device also stand-alone. Normally one can scan directly on a big and fat network printer scanner copier and specify scan resolution and image file format (e.g. tiff, PDF, ...) and all the other scanning options directly at the device and in particular one can specify an e-mail address to which the device will send the scanned image file so that one will receive the scanned image as a mail attachment according to what was specified as image file format. This way of operating is much more convenient for the user because when you would use a sane backend you would have to specify all the scanning parameters on your workstation by using a sane frontend. But your workstation is normally far away from the network scanner device so that you would have to place a sheet in the network scanner and post a big red note on the network scanner that you are currently using it for scanning so that others know what is going on and don't remove your sheet, then walk back to your workstation to specify the scanning parameters and start the scan and finally you would have to walk again to the network scanner to fetch your sheet and remove your note and walk back to your workstation. Of course this way of operating is much better for the physical health of the company staff ;-) According to what I read on a German Kyocera page http://www.kyocera.de/kyocera_n/german/news/fs_1118mfp_07.html it supports "Scan-to-E-Mail" which is hopefully exactly what I described above. David, Marcus, doesn't this work with the FS-1118 MFP? Or means "Scan-to-E-Mail" something different in this case? Kind Regards Johannes Meixner -- SUSE LINUX Products GmbH, Maxfeldstrasse 5 Mail: [email protected] 90409 Nuernberg, Germany WWW: http://www.suse.de/
