Hi, first of all, please also post to the list - not only to me!
On Thursday 14 July 2005 09:28, Slawomir Sejda wrote: [SNIPSNAP] > > > Hi > > First of all thanx for this tip. > > I have the same, look at the output: > . > . > . > [plustek] --------------------- > [plustek] usbDev_open(auto,) - 0x806c728 > [plustek] sanei_access_lock failed: 11 > [plustek] open failed: -1 > [plustek] sane_get_devices (0xbfac54a8, 0) > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > [plustek] sane_exit > > > I think something is wrong here. I checked my dll.conf and plustek.conf > and everything is ok. > I dont know what is going on but when I compile stable or install > slackware package (doesn't matter) everything is ok and scanner works. > Even earlier CVS snapshot worked fine. As I wrote I have this problem in > CVS after latest changes in plustek backend. > in the end, nothing is wrong ;) The locking mechanism has been enabled but could not lock the device and therefore you'll have no success. Please try the next one: xport SANE_DEBUG_SANEI_ACCESS=255 ; scanimage -L [sanei_debug] Setting debug level of sanei_access to 255. [sanei_access] sanei_access_init: >plustek< [sanei_access] sanei_access_lock: devname >libusb:002:003<, timeout: 5 [sanei_access] sanei_access_lock: success [sanei_access] sanei_access_unlock: devname >libusb:002:003< [sanei_access] sanei_access_unlock: devname >libusb:002:003< device `plustek:libusb:002:003' is a Canon N1240U/LiDE30 USB flatbed scanner and what about: ls -l /var/lock and what does id show? Probably you do not have access to /var/lock/sane Ciao, Gerhard
