Pierre- i know nothing about your scanner, but the way sane works, the 'dll' backend controls what other, device specific backends get loaded each time you run a sane front-end program.
try editing the dll.conf file on your box, and # out all the backends you are not using, and make sure the backend you ARE using are listed there. allan On Sun, 6 Nov 2005 [email protected] wrote: > Hi, > > I have both a video capture card (PCI) and an HP OfficeJet 5510 (usb) > connected > to a FC4 linux box. IU can print on the HP5510, but I cannot make sane > work. Always direct me to the video capture card. > > I have hpoj installed, and sane-find-scanner do see the 5510.: > found USB scanner (vendor=0x03f0, product=0x3a11) at libusb:001:006 > # Your USB scanner was (probably) detected. It may or may not be supported by > # SANE. Try scanimage -L and read the backend's manpage. > > and NOT the video capture card, BUT: > > scanimage -L > device `v4l:/dev/video0' is a Noname BT878 video (Hauppauge (bt878)) virtual > device > > How may I escape from this ? > > Thanks > > -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera
