Hello Up to now I have not managed to run xsane: Here are the reults of: sane-find-scanner # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04b8 [EPSON], product=0x0101 [Scanner GT-7000]) at libusb:002:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. scanimage -L device `epson:libusb:002:003' is a Epson GT-7000 flatbed scanner in the file /proc/bus/usb/devices I observe that Driver=none How Do I have to proceed to load the right driver with the system file usbfs. In other words the command which replace /sbin/modprobe scanner vendor=... product=... Many thanks Francois
