I have recently picked up a Fujitsu M3091DCd but after compiling the newest stable version of SANE the scanner doesn't work. I notice that the man page specifically mentions Firmware BF21 and naturally mine says BM02. Can anybody help me out with this. Can I up/down-grade my firmware somehow? Should it make a difference? I mean BM comes after BF so it should work better, right? < big grin >
Describing the behaviour: It's detected fine by the scsi card(s), scanadf and scanimage both talk to the device fine, it feeds the piece of paper right to where it _should_ start to scan, and then just writes image files without actually feeds the page. Oh, and it activates the bulb. If someone can point me in the right direction I'd be much obliged. I've got a shiny new toy and I can't play with it! Marty -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20060413/73a5caaf/attachment.htm From [email protected] Fri Apr 14 08:45:12 2006 From: [email protected] (Julien BLACHE) Date: Fri Apr 14 08:45:36 2006 Subject: [sane-devel] hp3500 vs. hp_rts88xx Message-ID: <[email protected]> Hi, The hp3500 backend has been added to the CVS some time ago, supporting HP 3500 series scanners. However, the pre-existing hp_rts88xx backend also claims to support these scanners (and a couple of others, non-3500). It seems that the hp3500 backend has better support for the hardware than hp_rts88xx. Can somebody confirm ? I'm shipping hp_rts88xx as part of libsane-extras in Debian, and obviously I can't have 2 backends supporting the same hardware, so there's a choice to be made :) Thanks, JB. -- Julien BLACHE <http://www.jblache.org> <[email protected]> GPG KeyID 0xF5D65169
