"Tom Mitchell" <trmitch...@hotmail.co.uk> writes: > Hi, > I am using an Asrock dual sata motherboard with AMD939 64 processor > and sataII drive. I have installed PClinuxos minime0.93a a Mandriva > based system on to a clean partion. I have also installed an Epson > r220 usb printer which works really well. > The Distro uses > xsane 0.991_2tex > sane-backends 1.0.18-1tex > libusb 1.0.18-1tex > kernel is 2.6.16.27.tex1.lve for i686 > kde version 3.5.3 > > I am unable to get the scanner to work. > It has worked before with Xandros3.0.2 and does with the simplymepis6 > livecd. So I know that the cables etc are ok. > > When booted with the scanner on > > sane-find-scanner results in > found USB scanner (vendor=0x04b8 [EPSON], product=0x0112 [EPSON > Scanner]) at libusb:004:004 > # Your USB scanner was (probably) detected. It may or may not be > supported by > # SANE. Try scanimage -L and read the backend's manpage. > > scanimage -L > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > this is both as root and as normal user. > > I have tried specifying the usb vendor and device in the epson.conf > and epkowa.conf files in /etc/sane.d
That is not necessary for either backend. > I have also modified /etc/udev/rules.d/70-libsane.rules > > ACTION!="add", GOTO="libsane_rules_end" > SUBSYSTEM!="usb_device", GOTO="libsane_rules_end" > as suggested for Iscan at > > http://www.avasys.jp/english/linux_e/faq_scan.html > > ACTION!="add", GOTO="libsane_rules_end" > SUBSYSTEM!="usb", GOTO="libsane_rules_end" > > but this doesnt work. Do NOT change the *libsane.rules file. Your distribution should have done the right thing. This change is only needed for *iscan.rules and then only on those distributions that do not use "usb_device" for the udev SUBSYSTEM name. So far, we know about Mandriva 2006.0. BTW, this will be fixed in the next iscan release. > #lsusb states > Bus 004 Device 004: ID 04b8:0112 Seiko Epson Corp. Perfection 2450 > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 003: ID 03f0:050c Hewlett-Packard 5219 Wireless Keyboard > Bus 001 Device 001: ID 0000:0000 > > > If I switch the scanner off and on I then get > > # scanimage -L > device `epkowa:libusb:004:005' is a Epson Perfection 2450 flatbed scanner > # scanimage >image.pnm > scanimage: no SANE devices found Do you have the epson backend disabled in /etc/sane.d/dll.conf? I'd expect to see `epson:libusb:004:005' listed in the scanimage -L output as well. Can you provide debugging output? The following command will put the debugging output in epkowa.log. SANE_DEBUG_EPKOWA=127 scanimage > image.pnm 2> epkowa.log > Whatever I try I cant seem to get to see the device. I would be > grateful for any help to resolve this. > Similar problems exist with Xandros4.0 Hope this helps, -- Olaf Meeuwissen EPSON AVASYS Corporation, SE1 FSF Associate Member #1962 sign up at http://member.fsf.org/ GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97 976A 16C7 F27D 6BE3 7D90 Penguin's lib! -- I hack, therefore I am -- LPIC-2