Hi together, upgrading from my former 32bit-system to a 64bit one I noticed a strange behaviour of my Plustek OpticPro 600P: It is recognized without any problem by scanimage -L. But when I try to scan it waits its 30 seconds until the lamp is heated up, then I can hear the motor bringing the lamp in starting position and directly afterwards the lamp is switched off. Then a short break, again the motor doing something, short break again and then the (switched off) lamp begins its travel over the scanning area. When it hits the end of the scanner it doesn't stop but still likes to continue what I always stopped by pulling the plug or hitting CTRL+C. With the same backend-version but in a 32bit chroot-environment the scanner works smoothly. When the lamp returns to its starting point it travels relatively silent in 32bit. In 64bit it's a noisy sound.
Some information about the system I'm using: Kubuntu on AMD64 3500+, all parport options (EPP, SPP etc.) tested in the meantime with no difference. libsane version 1.0.17-1ubuntu4 I also tested the newer backends including the daily CVS-snapshots with always the same result. I always used the direct access to the scanner, no kernel module. Best greetings and keep up the good work that enables me to still use my 10 years old scanner! :-) Martin
