"Martin Owens" <[email protected]> writes: > Sane will only incorperate open source drivers, unless ava are willing > to release their code under the gpl I don't think there is a lot we > can do.
The SANE project is kind enough to provide information on external backends (regardless of license). I've attached a diff of iscan's epkowa.desc against the version that's in CVS. If some kind soul with commit privileges would be so kind to apply and commit this ... > On 11/5/06, Bert Scholz <[email protected]> wrote: >> Hi, >> >> I have just bought the scanner "Epson perfection V10" and installed it with >> the rpm-packages available at www.avasys.jp and it works without any >> problems. >> Is it possible, to add this scanner to the sane-list? >> >> Using driver epkowa, operating system suse linux 10.1. >> >> If further details are wanted, just tell me. >> >> Regards Hope this helps, -- Olaf Meeuwissen EPSON AVASYS Corporation, SE1 FSF Associate Member #1962 sign up at http://member.fsf.org/ GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97 976A 16C7 F27D 6BE3 7D90 Penguin's lib! -- I hack, therefore I am -- LPIC-2 -------------- next part -------------- --- epkowa.desc 2006-11-06 09:17:17.000000000 +0900 +++ iscan-2.3.0/doc/epkowa.desc 2006-09-11 13:10:37.000000000 +0900 @@ -22,9 +22,9 @@ ;;; This list of devices was compiled from the following sources: ;;; -;;; * iscan-2.1.0/NEWS -;;; * iscan-2.1.0/doc/sane-epkowa.man -;;; * iscan-2.1.0/backend/epkowa_usb.c +;;; * iscan-2.3.0/NEWS +;;; * iscan-2.3.0/doc/sane-epkowa.man +;;; * iscan-2.3.0/backend/epkowa_usb.c ;;; * sane-backends/backend/epson_usb.c (CVS 1.18) ;;; * sane-backends/doc/descriptions/epson.desc (CVS 1.26) ;;; * http://www.freecolormanagement.com/sane/supported.html @@ -39,7 +39,7 @@ ;; Backend data. ;; :backend "epkowa" -:version "2.1.0" +:version "2.3.0" :url "http://www.avasys.jp/english/linux_e/index.html"; ;:comment "Based on the epson backend of sane-backends-1.0.15." @@ -195,6 +195,12 @@ :status :good :comment "IEEE1394 untested<br>100Base-TX/10Base-T unsupported" +:model "ES-H300" +:interface "USB" +:usbid "0x04b8" "0x012b" +:status :good +:comment "simplex ADF support only<br>Ethernet option not supported" + :model "Expression 636" :interface "SCSI" :status :complete @@ -273,6 +279,12 @@ :usbid "0x04b8" "0x0102" :status :unsupported +:model "GT-2500" +:interface "USB" +:usbid "0x04b8" "0x012b" +:status :good +:comment "overseas version of the ES-H300<br>simplex ADF support only<br>Ethernet option not supported" + :model "GT-4000" :status :untested @@ -491,6 +503,27 @@ :comment "only scans up to 2400dpi<br>requires DFSG non-free iscan-plugin-gt-f600" :url "http://www.avasys.jp/english/linux_e/dl_scan.html"; +:model "GT-F650" +:interface "USB" +:usbid "0x04b8" "0x012d" +:status :good +:comment "GT-S600 with TPU<br>requires DFSG non-free iscan-plugin-gt-s600" +:url "http://www.avasys.jp/english/linux_e/dl_scan.html"; + +:model "GT-F700" +:interface "USB" +:usbid "0x04b8" "0x012f" +:status :good +:comment "requires DFSG non-free iscan-plugin-gt-f700" +:url "http://www.avasys.jp/english/linux_e/dl_scan.html"; + +:model "GT-S600" +:interface "USB" +:usbid "0x04b8" "0x012d" +:status :good +:comment "requires DFSG non-free iscan-plugin-gt-s600" +:url "http://www.avasys.jp/english/linux_e/dl_scan.html"; + :model "GT-X700" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0128" @@ -574,6 +607,12 @@ :status :good :comment "business all-in-one<br>LP-M5500 with the fax option bundled<br>network interface not supported" +:model "ME200" +:interface "USB" +:usbid "0x04b8" "0x0830" +:status :good +:comment "all-in-one" + :model "PM-A700" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0814" @@ -586,6 +625,13 @@ :status :good :comment "all-in-one" +:model "PM-A820" +:interface "USB" +:usbid "0x04b8" "0x0827" +:status :good +:comment "all-in-one" + + :model "PM-A850" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0806" @@ -610,12 +656,24 @@ :status :good :comment "all-in-one" +:model "PM-A920" +:interface "USB" +:usbid "0x04b8" "0x082a" +:status :good +:comment "all-in-one" + :model "PM-A950" :interface "USB" :usbid "0x04b8" "0x081d" :status :good :comment "all-in-one" +:model "PM-A970" +:interface "USB" +:usbid "0x04b8" "0x0828" +:status :good +:comment "all-in-one" + :model "PX-A550" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x080e" @@ -628,6 +686,12 @@ :status :good :comment "all-in-one" +:model "PX-A720" +:interface "USB" +:usbid "0x04b8" "0x082e" +:status :good +:comment "all-in-one" + :model "Perfection 600" :interface "SCSI" :status :unsupported @@ -849,6 +913,27 @@ :status :untested :comment "seems to be a 4990 PHOTO with additional software" +:model "Perfection V10" +:interface "USB" +:usbid "0x04b8" "0x012d" +:status :good +:comment "overseas version of the GT-S600<br>requires DFSG non-free iscan-plugin-gt-s600" +:url "http://www.avasys.jp/english/linux_e/dl_scan.html"; + +:model "Perfection V100 PHOTO" +:interface "USB" +:usbid "0x04b8" "0x012d" +:status :good +:comment "overseas version of the GT-F650<br>requires DFSG non-free iscan-plugin-gt-s600" +:url "http://www.avasys.jp/english/linux_e/dl_scan.html"; + +:model "Perfection V350 PHOTO" +:interface "USB" +:usbid "0x04b8" "0x012f" +:status :good +:comment "overseas version of the GT-F700<br>requires DFSG non-free iscan-plugin-gt-f700" +:url "http://www.avasys.jp/english/linux_e/dl_scan.html"; + :model "Perfection V700" :interface "USB IEEE1394" :usbid "0x04b8" "0x012c" @@ -867,6 +952,18 @@ :status :unsupported :comment "all-in-one<br>supported by the snapscan backend" +:model "Stylus CX2800" +:interface "USB" +:usbid "0x04b8" "0x0830" +:status :good +:comment "all-in-one" + +:model "Stylus CX2900" +:interface "USB" +:usbid "0x04b8" "0x0830" +:status :good +:comment "all-in-one" + :model "Stylus CX3100" :interface "USB" :usbid "0x04b8" "0x0802" @@ -914,6 +1011,12 @@ :status :untested :comment "all-in-one" +:model "Stylus CX3900" +:interface "USB" +:usbid "0x04b8" "0x082f" +:status :good +:comment "all-in-one" + :model "Stylus CX4100" :interface "USB" :usbid "0x04b8" "0x0820" @@ -950,6 +1053,18 @@ :status :good :comment "all-in-one<br>overseas version of the PX-A650" +:model "Stylus CX4900" +:interface "USB" +:usbid "0x04b8" "0x082b" +:status :good +:comment "all-in-one" + +:model "Stylus CX5000" +:interface "USB" +:usbid "0x04b8" "0x082b" +:status :good +:comment "all-in-one" + :model "Stylus CX5100" :interface "USB" :usbid "0x04b8" "0x0801" @@ -976,11 +1091,27 @@ :model "Stylus CX5700F" :interface "USB" -:comment "all-in-one" +:usbid "0x04b8" "0x0821" +:status :unsupported +:comment "all-in-one with FAX" :model "Stylus CX5800F" :interface "USB" -:comment "all-in-one" +:usbid "0x04b8" "0x0821" +:status :unsupported +:comment "all-in-one with FAX" + +:model "Stylus CX5900" +:interface "USB" +:usbid "0x04b8" "0x082e" +:status :good +:comment "all-in-one<br>overseas version of the PX-A720" + +:model "Stylus CX6000" +:interface "USB" +:usbid "0x04b8" "0x082e" +:status :good +:comment "all-in-one<br>overseas version of the PX-A720" :model "Stylus CX6300" :interface "USB" @@ -1036,6 +1167,12 @@ :status :good :comment "all-in-one" +:model "Stylus DX4000" +:interface "USB" +:usbid "0x04b8" "0x082f" +:status :good +:comment "all-in-one" + :model "Stylus DX4200" :interface "USB" :usbid "0x04b8" "0x0820" @@ -1054,6 +1191,18 @@ :status :good :comment "DX4800 + card reader<br>all-in-one" +:model "Stylus DX5000" +:interface "USB" +:usbid "0x04b8" "0x082b" +:status :good +:comment "all-in-one" + +:model "Stylus DX6000" +:interface "USB" +:usbid "0x04b8" "0x082e" +:status :good +:comment "all-in-one<br>overseas version of the PX-A720" + :model "Stylus Photo RX420" :interface "USB" :usbid "0x04b8" "0x080f" From [email protected] Mon Nov 6 00:47:57 2006 From: [email protected] (Wittawat Yamwong) Date: Mon Nov 6 04:08:35 2006 Subject: [sane-devel] Canon PIXMA MP600 support In-Reply-To: <[email protected]> References: <[email protected]> Message-ID: <[email protected]> Hi, On Saturday 04 November 2006 18:15, ikezoe wrote: > I want to work on support for Canon PIXMA MP600. > So I got http://home.arcor.de/wittawat/pixma/mp150-0.12.2.tar.bz2 > and edited pixma_mp150.c file following: > [...] > I failed scan. > Please tell me what I do. Please try the patch in the attachment (to be applied against original mp150-0.12.2) and let's see what will happen. I didn't have much time to check the code. So, don't be surprised if it doesn't work. ;-) Regards -- Wittawat Yamwong Hannover, Germany -------------- next part -------------- A non-text attachment was scrubbed... Name: mp600.patch Type: text/x-diff Size: 5456 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20061106/a3a42d8d/mp600.bin From [email protected] Mon Nov 6 10:19:38 2006 From: [email protected] ([email protected]) Date: Mon Nov 6 10:20:06 2006 Subject: [sane-devel] Problems with sane and USB In-Reply-To: <[email protected]> References: <[email protected]> <[email protected]> Message-ID: <[email protected]> On Sat, Nov 04, 2006 at 07:12:39PM -0500, m. allan noah wrote: > On Sat, 4 Nov 2006 [email protected] wrote: > > >If I run "sane-find-scanner" as root it correctly says:- > > > > found USB scanner (vendor=0x04b8 [EPSON], product=0x012c [EPSON > > Scanner]) at libusb:7:2 > > > >I can make this work as a user by changing permissions but I'm not > >clear how to make the change 'stick'. > > look at the docs for udev, i assume slack uses it. > > > > >If I run "scanimage -L" as root it says "No scanners were identified". > > > >If I run "xsane" or "xscanimage" as root they find both my scanners. > > the fact that scanimage does not work, but xsane does, generally means > that you have two copies of sane-backends installed, often the distro's > original one, and one in /usr/local > Ah, thanks, it's possible that I do have two copies of sane installed, I'll investigate. > > > >If I run "xsane" or "xscanimage" as a user they only see the HP > >all-in-one scanner. > > permissions > > > > >If I run iscan (which I have installed) it says "Could not send > >command to scanner". > > > > no idea. i dont use epson stuff or iscan. > > > > >So how do I get this all to work consistently? > > > > trash all copies of sane on system. try again? i dont know if you need the > proprietary modules or if the epson backend works? > The epson backend is supposed to work with the V700. There's an "epkowa" backend specifically for iscan. -- Chris Green ([email protected])
