Hi. After fighting for 6 days trying to install this scanner and sending mails to SuSe Forums, submitting a SR and having still no answer,.. Reading EPSON Avasys note where they stand that the driver will not support the scanner , blah blah blah... I just want to know if there is any kind of compatibility with any other kind of driver (like perfection).... just to see if there is any remote possibility to make it work. Thanks in advance for your response.
Luis Su?rez -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20070129/cdc3ef7d/attachment.htm From [email protected] Tue Jan 30 15:32:27 2007 From: [email protected] (=?ISO-8859-1?Q?=C9tienne?= Bersac) Date: Tue Jan 30 15:52:35 2007 Subject: [sane-devel] HP OfficeJet G55 In-Reply-To: <[email protected]> References: <[email protected]> Message-ID: <1170167547.5978.1.camel@thilivren> See HPLIP. Run hp-setup or configure your HP device throught gnome-cups-manager (using HPLIP), and then launch a sane frontend. ?tienne. -- Verso l'Alto ! -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e?= Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20070130/452b4ca0/attachment.pgp From [email protected] Tue Jan 30 18:20:53 2007 From: [email protected] (Bauke Jan Douma) Date: Tue Jan 30 18:32:03 2007 Subject: [sane-devel] Epson Perfection 3490: now always warming up with each individual scan In-Reply-To: <[email protected]> References: <[email protected]> Message-ID: <[email protected]> Bauke Jan Douma wrote on 28-01-07 16:19: > I noticed now that the carriage isn't returned properly, > stops about 1/3 in the return. It's being returned > properly first when a next scan happens. What gives? ... but then after that next scan the same thing happens. This is with sane-backends-1.0.1[678]. I tried to 'reset' the scanner by pulling the plug at the moment when the carriage reaches its initial position after a scan command has been given, before the actual scan is carried out, but after the scan is completed it again stops at about 1/3 on the home stretch. The scanner worked without a hitch before with at least sane-backends-1.0.16. Any advice, or anyone experience with this? bjd
