This is what came up when I ran scanimage with the scanner connected >>>
[root@localhost rbw]# scanimage [sanei_debug] Setting debug level of sm3600 to 5. [sm3600] SM3600 init [sm3600] SM3600 version: 1000006 [sm3600] found dev 05DA/40CA, libusb:001:003 [sm3600] opening libusb:001:003 [sm3600] libusb:001:003<>libusb:001:003 scanimage: rounded value of br-x from 50 to 49.9954 scanimage: rounded value of br-y from 80 to 79.9927 [sm3600] starting scan... [sm3600] mode=0, res=75, BC=[0,0], xywh=[1039,1417,1323,2362] [sm3600] DoOriginate() [sm3600] lt1=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 [sm3600] lt2=1 >>>>> At this point I shut the scanner down. It looks to me like it is not incrementing / moving the stepper motor...but I am not sure if there is anything I can do to implement it. It did not print anything to the log file however (I may have to the file referred to in the man page but I am not sure where it is). [email protected]
