Konnichiwa Nomura san, Thanks for your message. So it seems that I cannot use my scanner for a while?
Did you solve your problem? Ja mata Antonio Tomoo Nomura escreveu: > Antonio Olinto wrote: >> Hi, >> >> I have a Canon N676U USB Scanner and its status is "complete" at >> http://www.sane-project.org/lists/sane-mfgs-cvs.html#Z-CANON >> >> When I had an Athlon XP 1700+ computer (USB 1.0) running Ubuntu 6.06 >> I was able to use my scanner without problems. After an up-grade, now >> I'm using a Pentium D 2.8 (USB 2.0) and Linux Ubuntu 6.10, it didn't >> work any more. Xsane can recognize the scanner but when I ask a >> pre-view the scanner began to make a lot of noise and I have to >> disconnect it. Under Windows it stills running ok. >> >> Is there something I can do configure the driver? >> >> Thanks in advance! >> >> Antonio >> >> >> > I have experienced exact the same problem. > See below. > > -------------------------------------------------------------------------------------------------- > > > > Monday 26 February 2007 06:52, Tomoo Nomura wrote: > >> > Hello, >> > >> > I can scan by scanimage but can't by xscanimage or xsane. >> > >> > Xscanimage or xsane takes several minutes and finish normally but >> > hardware doesn't seem to work and result image is whole black. >> > Xscanimage or xsane asks me which device to use, there are tv tuner, >> > camera and scanner, and I explicitly choose plustek:libusb:002:002 for >> > CanoScan N676U. >> > >> > environments: >> > Debian Linux etch >> > kernel 2.6.19.1 >> > sane 1.0.14-2 >> > scanner CanoScan N676U >> > backend plustek >> > >> > This problem is not only related to the Plustek backend > and could be observed on other debian based distros as well. > > I had no time to dig somewhat deeper to that, but I assume > it had something to do with threading > > - Gerhard >
