try running lsusb, and dmesg. see if anything shows up. if not, do you have a kernel module installed for your usb controller (uhci_hcd, ohci_hcd, ehci_hcd)? you will also need a recent libusb.
allan On 4/14/07, guus <[email protected]> wrote: > Hi Allan, > > Thank you and Juan Pablo Mendoza for your work. I have obtained the > latest cvs snapshot and the scanner works fine on scsi now: color, > double sided, everything that I tried is ok. > > The erroneous pixel shift is also gone. Kudos! > > I would like to confirm the USB operation, but I am not familiar with > USB. You can find some of my futile attempts below. SCSI is removed from > fujitsu.conf, some USB settings added. Did I miss anything? > > The machine will be with me for a few more days, so let me know if there > is anything I can do to help test. > > Greets, > Guus. > > > > doo:/tmp# lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 005: ID 04c5:10ad Fujitsu, Ltd > Bus 001 Device 001: ID 0000:0000 > > doo:/tmp# tail -3 /etc/sane.d/fujitsu.conf > > #fi-5650C > usb 0x4c5 0x10ad > > doo:/tmp# sane-find-scanner > > # sane-find-scanner will now attempt to detect your scanner. If the > # result is different from what you expected, first make sure your > # scanner is powered up and properly connected to your computer. > > # No SCSI scanners found. If you expected something different, make > sure that > # you have loaded a kernel SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x04c5, product=0x10ad) at libusb:001:005 > # Your USB scanner was (probably) detected. It may or may not be > supported by > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary ports > # can't be detected by this program. > > doo:/tmp# scanadf > [sanei_debug] Setting debug level of fujitsu to 10. > [fujitsu] sane_init: start > [fujitsu] sane_init: fujitsu backend 1.0.47, from sane-backends 1.0.18-cvs > [fujitsu] sane_init: finish > [fujitsu] sane_get_devices: start > [fujitsu] find_scanners: start > [fujitsu] find_scanners: finish > [fujitsu] sane_get_devices: finish > scanadf: no SANE devices found > [fujitsu] sane_exit: start > [fujitsu] sane_exit: finish > > doo:/tmp# > > m. allan noah wrote: > > > the sane 1.0.18-X comes from your linux distro, which i assume to be > > suse? you cannot get the -X part from us. you could attempt to extract > > it from their source package, but i dont think you need to, because: > > > > you have spectacular liming. thanks to some help from Juan Pablo > > Mendoza, i have just committed some code to sane cvs that should make > > your scanner work on both scsi and usb, in all color modes. can you > > please do a cvs checkout, verify that it contains fujitsu backend v > > 1.0.47, and make some tests with it? > > > > i am especially interested in the line-shifting problem, and would > > like to see a small sample, as well as a noisier debug log if the > > problem continues with latest backend. > > > > allan > > > > On 4/13/07, guus <[email protected]> wrote: > > > >> Hello All, > >> > >> I have bought a fi-5650c scanner to replace a fi-4120c. > >> In addition, I have a new linux server. > >> > >> The new scanner is fine, it works ok when I connect it instead to my > >> old server. > >> The new server is also fine: the old fi-4120c scanner works ok on the > >> new server. > >> > >> The problem is that the new fi-5650c scanner does not operate when I > >> connect it to the new server: > >> scanner is recognized ok and the adf starts feeding but stops > >> halfway, before any real scanning: > >> > >> Here is an excerpt from the debug output (full text below): > >> > >> [fujitsu] sense_handler: start > >> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1, ILI=0, info=00000000 > >> [fujitsu] Illegal request: invalid field in parm list > >> [fujitsu] Offending byte is 00 > >> [fujitsu] do_scsi_cmd: return 'Invalid argument' > >> > >> This looks like a software bug, because the scanner functions ok. > >> I would report it as a bug, if I knew more about the cause. > >> > >> My old server: > >> - kernel: 2.6.8-2-686 > >> - cpu: Intel Celeron > >> - scsi: LSI Logic / Symbios Logic 53c810 (rev 23) > >> - libsane: 1.0.18-3 > >> > >> My new server > >> - kernel: 2.6.18-4-amd64 > >> - cpu: Dual Core AMD Opteron > >> - scsi: Adaptec AHA-7850 (rev 03) > >> - libsane: 1.0.18-6 > >> > >> I am not sure where to look; my choices seem limited and/or futile: > >> - I have a k7 server that I could try, but what would be the point? > >> - I could try swopping scsi cards, but that is probably futile > >> - USB is not an option for this scanner, according to libusb. > >> > >> Unfortunately, the reported scanner dialogues have really changed > >> from sane 1.0.18-3 to 1.0.18-6 > >> > >> The most likely cause is some change in the sanei area, because the > >> fujitsu backend is not changed, > >> according to a brief inspection of cvs. > >> > >> Most likely short term solution: fall back to 1.0.18-3 > >> But how can I retrieve the 1.0.18-3 sources from cvs??? > >> > >> Another minor problem of the fi-5650 under sane is that each pixel > >> row is shifted by one pixel > >> relative to the previous row, making the output image look slanted. > >> My own software can compensate > >> for this, so it is not a big problem. However, it may be related (who > >> knows). > >> > >> Thanks for any help. > >> Guus. > >> > >> > >> [sanei_debug] Setting debug level of fujitsu to 10. > >> [fujitsu] sane_init: start > >> [fujitsu] sane_init: fujitsu backend 1.0.33, from sane-backends 1.0.18 > >> [fujitsu] sane_init: finish > >> [fujitsu] sane_get_devices: start > >> [fujitsu] find_scanners: start > >> [fujitsu] attach_one: start > >> [fujitsu] connect_fd: start > >> [fujitsu] wait_scanner: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] wait_scanner: finish > >> [fujitsu] connect_fd: finish > >> [fujitsu] init_inquire: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] init_inquire: finish > >> [fujitsu] init_vpd: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] init_vpd: finish > >> [fujitsu] init_model: start > >> [fujitsu] init_model: finish > >> [fujitsu] init_options: start > >> [fujitsu] init_options: finish > >> [fujitsu] disconnect_fd: start > >> [fujitsu] disconnect_fd: finish > >> [fujitsu] attach_one: finish > >> [fujitsu] find_scanners: finish > >> [fujitsu] sane_get_devices: finish > >> [fujitsu] sane_open: start > >> [fujitsu] connect_fd: start > >> [fujitsu] wait_scanner: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] wait_scanner: finish > >> [fujitsu] connect_fd: finish > >> [fujitsu] sane_open: finish > >> scanadf: rounded value of br-x from 215.872 to 215.872 > >> scanadf: rounded value of br-y from 279.364 to 279.364 > >> [fujitsu] sane_start: start > >> [fujitsu] scanner_control: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] scanner_control: finish > >> [fujitsu] calculateDerivedValues: start > >> [fujitsu] xres=600, tlx=0, brx=10200, pw=10200, maxx=14592 > >> [fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800 > >> [fujitsu] xres=600, tlx=0, brx=10208, pw=10200, maxx=14592 > >> [fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800 > >> [fujitsu] calculateDerivedValues: finish > >> [fujitsu] setup_buffers: start > >> [fujitsu] setup_buffers: finish > >> [fujitsu] set_window: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] set_window: finish > >> [fujitsu] object_position: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] wait_scanner: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] wait_scanner: finish > >> [fujitsu] object_position: finish > >> [fujitsu] start_scan: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] do_scsi_cmd: finish > >> [fujitsu] start_scan: finish > >> [fujitsu] sane_start: finish > >> [fujitsu] sane_get_parameters: start > >> [fujitsu] calculateDerivedValues: start > >> [fujitsu] xres=600, tlx=0, brx=10208, pw=10200, maxx=14592 > >> [fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800 > >> [fujitsu] xres=600, tlx=0, brx=10208, pw=10200, maxx=14592 > >> [fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800 > >> [fujitsu] calculateDerivedValues: finish > >> [fujitsu] sane_get_parameters: finish > >> [fujitsu] sane_read: start > >> [fujitsu] read_from_scanner: start > >> [fujitsu] do_scsi_cmd: start > >> [fujitsu] sense_handler: start > >> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1, ILI=0, info=00000000 > >> [fujitsu] Illegal request: invalid field in parm list > >> [fujitsu] Offending byte is 00 > >> [fujitsu] do_scsi_cmd: return 'Invalid argument' > >> [fujitsu] read_from_scanner: error reading data block status = 4 > >> [fujitsu] read_from_scanner: finish > >> [fujitsu] sane_read: front returning 4 > >> scanadf: sane_read: Invalid argument > >> Invalid argument > >> Scanned 0 pages > >> [fujitsu] sane_cancel: start > >> [fujitsu] do_cancel: start > >> [fujitsu] do_cancel: finish > >> [fujitsu] sane_cancel: finish > >> [fujitsu] sane_close: start > >> [fujitsu] do_cancel: start > >> [fujitsu] do_cancel: finish > >> [fujitsu] disconnect_fd: start > >> [fujitsu] disconnect_fd: finish > >> [fujitsu] sane_close: finish > >> [fujitsu] sane_exit: start > >> [fujitsu] disconnect_fd: start > >> [fujitsu] disconnect_fd: finish > >> [fujitsu] sane_exit: finish > >> > >> > >> -- > >> sane-devel mailing list: [email protected] > >> http://lists.alioth.debian.org/mailman/listinfo/sane-devel > >> Unsubscribe: Send mail with subject "unsubscribe your_password" > >> to [email protected] > >> > > > > > > -- "The truth is an offense, but not a sin"
