To whom it may concern: I just installed SANE 1.0.19, but it does not recognize my HP Scanjet 3570c scanner. Both "scanimage -L" and "sane-find-scanner" give me the "no scanners found" message. This occurs even when I am logged in as root.
"lsusb" produces the following output: Bus 001 Device 003: ID 03f0:2005 Hewlett-Packard ScanJet 3570c Bus 001 Device 001: ID 0000:0000 "cat /proc/bus/usb/devices" produces the following output: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.21-1.3194.fc7 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=2005 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=hp scanjet 3500c series S: SerialNumber=SCN25DN60F81P C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms I am running Fedora 7, kernel version 2.6.21. Any help with this problem would be greatly appreciated. jstewart
