On Mon, 9 Oct 2006, Marco Herrn wrote: > Hi, > > On Mon, Oct 09, 2006 at 01:55:43PM -0400, m. allan noah wrote: >>> $ scanimage --device=hpoj:hpjd:192.168.1.50 >>> scanimage: sane_start: Error during device I/O >>> >>> > > [...] >> hpoj seems to no longer be supported by its makers. you could upgrade to >> HPLIP? http://hplip.sourceforge.net/ > > Thanks, calling hp-makeuri 192.168.1.50 now gives me the URI > hpaio:/net/HP_LaserJet_3052?p=192.168.1.50. Giving to scanimage as device > does work and I get a correct scan. > > However, scanimage -L does not list it as a device. Also xsane and > xscanimage obviously try to scan from the bttv TV-Card and provides > me with no possibility to select the device. How can I "register" this > device to sane? (I am using Debian, if that helps.) >
try asking the hplip folks, the makers of the backend. allan > > Regards > Marco > > -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera From [email protected] Mon Oct 9 20:25:19 2006 From: [email protected] (m. allan noah) Date: Mon Oct 9 20:51:49 2006 Subject: [sane-devel] "Error during device I/O" with ehternet attached HP LJ 3052 In-Reply-To: <20061009191801.GA13160@lurkabove> References: <20061008171850.GA12076@lurkabove> <[email protected]> <20061009191801.GA13160@lurkabove> Message-ID: <[email protected]> On Mon, 9 Oct 2006, Marco Herrn wrote: > Hi, > > On Mon, Oct 09, 2006 at 01:55:43PM -0400, m. allan noah wrote: >>> $ scanimage --device=hpoj:hpjd:192.168.1.50 >>> scanimage: sane_start: Error during device I/O >>> >>> > > [...] >> hpoj seems to no longer be supported by its makers. you could upgrade to >> HPLIP? http://hplip.sourceforge.net/ > > Thanks, calling hp-makeuri 192.168.1.50 now gives me the URI > hpaio:/net/HP_LaserJet_3052?p=192.168.1.50. Giving to scanimage as device > does work and I get a correct scan. > > However, scanimage -L does not list it as a device. Also xsane and > xscanimage obviously try to scan from the bttv TV-Card and provides > me with no possibility to select the device. How can I "register" this > device to sane? (I am using Debian, if that helps.) > try asking the hplip folks, the makers of the backend. allan > > Regards > Marco > > -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera From [email protected] Tue Oct 10 00:15:51 2006 From: [email protected] (Olaf Meeuwissen) Date: Tue Oct 10 00:18:08 2006 Subject: [sane-devel] Iscan install In-Reply-To: <[email protected]> (Wolfram Heider's message of "Sat, 07 Oct 2006 03:11:46 +0200") References: <[email protected]> <[email protected]> <[email protected]> Message-ID: <[email protected]> "Wolfram Heider" <[email protected]> writes: > On Sat, 07 Oct 2006 01:38:00 +0200, Russbucket <[email protected]> wrote: > >> On Fri October 6 2006 14:10, Gary Montalbine wrote: >>> Tried to install iscan 2.3 and got the following errors: >>> >>> rpm -ivh iscan-2.3.0-1.c2.i386.rpm >>> Preparing... ########################################### >>> [100%] >>> file /usr/lib/sane/libsane-epkowa.so.1.0.15 from install of >>> iscan-2.3.0-1.c2 conflicts with file from package >>> libsane1-1.0.18-7mdv2007.0 file >>> /usr/share/locale/de/LC_MESSAGES/iscan.mo >>> from install of iscan-2.3.0-1.c2 conflicts with file from package >>> sane-backends-1.0.18-7mdv2007.0 >>> [snip] >>> >>> Tried to install iscan 2.1 and got the following error: >>> >>> rpm -ivh iscan-2.1.0-1.c2.i386.rpm >>> Preparing... ########################################### >>> [100%] >>> file /usr/lib/sane/libsane-epkowa.so.1.0.15 from install of >>> iscan-2.1.0-1.c2 conflicts with file from package >>> libsane1-1.0.18-7mdv2007.0 >>> >>> I have a Perfection 3490 photo scanner using a new installed >>> mandriva 2007. >>> [snip] > > There seem to be some flaws in the mdk SANE.rpm. Ich would recommend > to uninstall and substitute it with the .tar.gz from the SANE-server. Yup! Seems mandriva decided to make iscan part of the SANE project ... and did a bad job at that (message catalogs for the frontend in the sane-backends package???). I'll be filing a bug report to get iscan removed from their packages. If they insist on providing iscan, they should do so in a separate package. In the mean time, you can --force the install (at the risk of getting more of these warnings when you try updating Mandriva's SANE packages). Hope this helps, -- Olaf Meeuwissen EPSON AVASYS Corporation, SE1 FSF Associate Member #1962 sign up at http://member.fsf.org/ GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97 976A 16C7 F27D 6BE3 7D90 Penguin's lib! -- I hack, therefore I am -- LPIC-2
