Hi Ilia: Thanks for your work so far on the hp5590 backend.
I am the owner of an HP ScanJet 5590, and have been experimenting with scanning in flatbed, simplex and duplex ADF mode using your backend. I've encountered some issues, and wonder if you've heard of these problems. I am using the SANE "scanimage" command in all cases. 1. "Overscanning" pages (simplex/duplex ADF) If the ADF-scanned page is smaller than the geometry set in the -y parameter value, content from the following page is included on the previous page. It would seem that the backend is not detecting where a page is actually physically stopping, and is simply continuing onto the next page to get the content it wants. Where there is no content (no more pages to feed from the ADF), the remaining "expected" page area is filled with a quasi-crosshatch pattern). 2. Duplex pages mirrored and upside-down pages (duplex ADF) The backs of pages are being scanned mirrored and upside-down. I have managed to automate a solution to this in a script (attached), which seems to work. 3. Color picture scans are streaked (flatbed) High-contrast areas in the tops of photos seem to streak down below into the rest of scanned photos, causing significant degradation of image quality. This kind of streaking does not seem to occur with lineart scans. I'd be happy to help further diagnose and correct these issues so that the backend can be enjoyed by myself and others. Thanks, Paul -------------- next part -------------- A non-text attachment was scrubbed... Name: scan-letter-duplex Type: application/x-shellscript Size: 949 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20080214/b886ac29/attachment.bin
