I download sane-backends-1.0.19.tar.gz and install it. and run like you said. It works fine. I wonder why doesn't work with rpm package. thanks.
On Thu, Feb 21, 2008 at 2:39 PM, m. allan noah <kitno455 at gmail.com> wrote: > clue? yes. run the command i told you, with the 5590 in it. > > allan > > > > On Thu, Feb 21, 2008 at 12:11 PM, tobias alarcon <extobias at gmail.com> > wrote: > > i get this when with scanimage -L > > > > root at localhost ~]# scanimage -L > > [sanei_debug] Setting debug level of hp to 20. > > [hp] sane_init called > > [hp] hp_init: global.is_up = 1 > > [hp] sane_init will finish with Success > > [hp] sane_get_devices called > > [hp] hp_read_config: hp backend v1.06/$Revision: 1.21 $ starts reading > > config file > > [hp] hp_read_config: processing line <#scsi HP> > > [hp] hp_read_config: processing line <# Uncomment the following if you > > have "Error during device I/O" on SCSI> > > [hp] hp_read_config: processing line <# option dumb-read> > > [hp] hp_read_config: processing line <#> > > [hp] hp_read_config: processing line <# The usual place for a > > SCSI-scanner on Linux> > > [hp] hp_read_config: processing line <#/dev/scanner> > > [hp] hp_read_config: processing line <#> > > [hp] hp_read_config: processing line <# USB-scanners supported by the > > hp-backend> > > [hp] hp_read_config: processing line <# HP ScanJet 4100C> > > [hp] hp_read_config: processing line <usb 0x03f0 0x0101> > > [hp] hp_read_config: processing line <# HP ScanJet 5200C> > > [hp] hp_read_config: processing line <usb 0x03f0 0x0401> > > [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0101" > > [hp] hp_read_config: processing line <# HP ScanJet 62X0C> > > [hp] hp_read_config: processing line <usb 0x03f0 0x0201> > > [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0401" > > [hp] hp_read_config: processing line <# HP ScanJet 63X0C> > > [hp] hp_read_config: processing line <usb 0x03f0 0x0601> > > [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0201" > > [hp] hp_read_config: processing line <> > > [hp] hp_read_config: processing line <# Uncomment the following if > > your scanner is connected by USB,> > > [hp] hp_read_config: processing line <# but you are not using libusb> > > [hp] hp_read_config: processing line <# /dev/usb/scanner0> > > [hp] hp_read_config: processing line <# option connect-device> > > [hp] hp_read_config: attach usb 0x03f0 0x0601 > > [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0601" > > [hp] hp_read_config: reset to default config > > [hp] sane_get_devices will finish with Success > > > > No scanners were identified. If you were expecting something different, > > check that the scanner is plugged in, turned on and detected by the > > sane-find-scanner tool (if appropriate). Please read the documentation > > which came with this software (README, FAQ, manpages). > > [hp] sane_exit called > > [hp] hp_destroy: global.is_up = 0 > > [hp] sane_exit will finish > > > > any clue? > > > > > > > > -- > "The truth is an offense, but not a sin" >
