Hi, thanks Oliver.
This is what i'm getting showed in the terminal: $ SANE_DEBUG_SNAPSCAN=255 xsane 2>debug.log User defined signal 1 $ And here you can find what appeared today in var/log/debug: http://home.mnet-online.de/hta/debug.txt Christoph Oliver Schwartz schrieb: > Hi, > > please also provide the log produced by > SANE_DEBUG_SNAPSCAN=255 xsane 2 > debug.log > > then use xsane until the error occurs. The logs tend to get quite big, > so you should compress it. > > Regards, > > Oliver > > On 21.06.2008, at 17:46, Christoph M. Schr?der wrote: > >> Hi, >> >> thanks for the information. My fault. >> >> You can now find them here: >> http://home.mnet-online.de/hta/syslog.txt >> http://home.mnet-online.de/hta/messages.txt >> >> Christoph >> >> Julien BLACHE schrieb: >>> "Christoph M. Schr?der" <cmschroeder at maxi-dsl.de> wrote: >>> >>> Hi, >>> >>> >>>> i wrote, i sometimes also get this "Failed to start scanner: error >>>> during device I/O" message. And in the sane-project.org FAQ is written >>>> to connect the mailing list, if an error like this appears. >>>> >>>> I'd really be happy if i could solve this problem... >>>> >>> > >
