Hi! I succesfuly compiled and installed Sane backends on nice small Linux machine Bubba. That is personal mini server without any connectors for monitor, keyboard and mouse. The only access is trought SSH or web interfaces. Contains some good sevices like media server, ftp, print server, samba etc. I have managed to work on them my HP Deskjet F2180 multifuncional printer. But of course I would like to use his scanning abilities too - i.e. use it like network scanner.
So where I am now: scanimage -L gives me "No scanners were identified..." while sane-find-scanner gives: found USB scanner (vendor=0x03f0 [HP], product=0x7d04 [Deskjet F2100 series]) at libusb:001:010 cat /proc/bus/usb/devices shows: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=7d04 Rev= 1.00 S: Manufacturer=HP S: Product=Deskjet F2100 series S: SerialNumber=CN7954Q1SN04TK C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=cc Prot=00 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=03(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=d4 Prot=00 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=10ms but cat /proc/bus/usb/drivers no such file or directory Thanks in advance! brgds Janeks
