Hi Rene, using the CVS version (1.1.0) has resolved the vertical stripes! images look good. I had a single tripe at the middle of the page and cleaning the CCD glass has fixed it.
Thanks for the help. G >>> >>> IIRC CVS outputs 1.1.0 or so already. >>> >>> If you have not taken extra measures you might have two >>> versions of SANE on your system, now and run the old one, >>> see: >>> >>> http://www.exactcode.de/site/open_source/saneavision/compiling/ >>> >>> (And various other guides.) >>> >>> On 25.11.2008, at 13:44, Zudio Solutions wrote: >>>> >>>> thanks Rene. >>>> >>>> Sorry to be a pain, but I'm learning here. >>>> >>>> I got the CVS, configure, make and install. Still getting the >>>> strips. how do i know which version is running (CVS or 1.0.19 ) >>>> is that using scanimage --help ? >>>> >>>> any help would be appreciated. >>>> >>>> Cheers, >>>> Gil >>>> >>>> On Tue, Nov 25, 2008 at 10:40 PM, Rene Rebe <rene at exactcode.de> >> >> wrote: >>>>> >>>>> Yeah - and you're still not using CVS ... >>>>> >>>>> AFAICS CVS is fine. >>>>> >>>>>> wrote: >>>>>>> >>>>>>> If there are just tiny, very light lines then there >>>>>>> is probably dust on the CCD glass, you can wipe it >>>>>>> clean with air or some clean soft towel. >>>>>>> >>>>>>> Jacques Verhagen wrote: >>>>>>>> >>>>>>>> I have the same problem, >>>>>>>> >>>>>>>> It is not a Sane or Linux problem. >>>>>>>> With XP as os I get the same results >>>>>>>> I think it is a AV220 problem or the paper quality. >>>>>>>> >>>>>>>> Wilhelm Meier schreef: >>>>>>>>> >>>>>>>>> Am Freitag 21 November 2008 schrieb Ren? Rebe: >>>>>>>>>> >>>>>>>>>> m. allan noah wrote: >>>>>>>>>>> >>>>>>>>>>> the author of the avision backend seems to be missing, but >>>>>>>>>>> you could try to email him directly. >>>>>>>>>>> >>>>>>>>>>> <rene at exactcode dot de> >>>>>>>>>> >>>>>>>>>> Missing? (Just busy at work I would name it :-) >>>>>>>>>> >>>>>>>>>> I also got another mail asking about the AV122 buttons >>>>>>>>> >>>>>>>>> yes, that was me ... >>>>>>>>> >>>>>>>>>> , as he did >>>>>>>>>> not mention other problems I think CVS head should be fine. >>>>>>>>> >>>>>>>>> and CVS Head is fine with respect to scanning and image >>>>>>>>> data! >>>>>>>>> >>>>>>>>>> Have >>>>>>>>>> you tried CVS? >>>>>>>>>> >>>>>>>>>>> allan >>>>>>>>>>> >>>>>>>>>>> On Thu, Nov 20, 2008 at 6:09 AM, Zudio Solutions >>>>>>>>> >>>>>>>>> <zudiosol at gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Hello to the community. I'm new to SANE and hope that you >>>>>>>>>>>> can assist. >>>>>>>>>>>> >>>>>>>>>>>> I'm using AV122 Avision scanner and getting horrible >>>>>>>>>>>> vertical strips no matter what options I'm using. >>>>>>>>>>>> I'm on this environment: >>>>>>>>>>>> (vendor=0x0638 [AVISION ], product=0x0a33 [AV 122]) >>>>>>>>>>>> scanimage (sane-backends) 1.0.19; backend version 1.0.19 >>>>>>>>>>>> device `avision:libusb:004:005' is a Avision AV122 >>>>>>>>>>>> sheetfed scanner Ubuntu 8.10 >>>>>>>>>>>> >>>>>>>>>>>> From my readings in the archive the issue relates to >>>>>>>>>>>> calibration. Trying 'quality calibration' ON and OFF >>>>>>>>>>>> doesn't change a thing. Scanning in windows is fine, no >>>>>>>>>>>> issues. >>>>>>>>>>>> >>>>>>>>>>>> Any ideas? >>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>> GHOZ >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> sane-devel mailing list: >>>>>>>>>>>> sane-devel at lists.alioth.debian.org >>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-deve >>>>>>>>>>>> l Unsubscribe: Send mail with subject "unsubscribe >>>>>>>>>>>> your_password" >>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Ren? Rebe - ExactCODE GmbH - Europe, Germany, Berlin >>>>>>>>>> http://exactcode.de | http://t2-project.org | >>>>>>>>>> http://rene.rebe.name >>>>>>> >>>>>>> -- >>>>>>> Ren? Rebe - ExactCODE GmbH - Europe, Germany, Berlin >>>>>>> http://exactcode.de | http://t2-project.org | >>>>>>> http://rene.rebe.name >>>>>>> >>>>>>> -- >>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org >>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>> Unsubscribe: Send mail with subject "unsubscribe >>>>>>> your_password" to sane-devel-request at lists.alioth.debian.org >>>>> >>>>> -- >>>>> Ren? Rebe - ExactCODE GmbH - Europe, Germany, Berlin >>>>> http://exactcode.de | http://t2-project.org | >>>>> http://rene.rebe.name >>> >>> -- >>> Ren? Rebe - ExactCODE GmbH - Europe, Germany, Berlin >>> http://exactcode.de | http://t2-project.org | >>> http://rene.rebe.name >> >> >> >> -- >> Wilhelm > > -- > Ren? Rebe - ExactCODE GmbH - Europe, Germany, Berlin > http://exactcode.de | http://t2-project.org | http://rene.rebe.name > >
