Great, thanks for the quick reply! Here is the output of the scanimage -T
$ export SANE_DEBUG_PIXMA=10 $ scanimage -T [sanei_debug] Setting debug level of pixma to 10. [pixma] pixma version 0.15.0 [pixma] pixma_collect_devices() found Canon imageCLASS MF4690 at libusb:005:004 [pixma] sanei_bjnp_find_devices: [pixma] eth0 is IPv4 capable, sending broadcast.. [pixma] pixma_find_scanners() found 1 devices [pixma] pixma_collect_devices() found Canon imageCLASS MF4690 at libusb:005:004 [pixma] sanei_bjnp_find_devices: [pixma] eth0 is IPv4 capable, sending broadcast.. [pixma] pixma_open(): Canon imageCLASS MF4690 [pixma] Trying to clear the interrupt buffer... [pixma] no packets in buffer [pixma] Reader task id=12781 (forked) scanimage: scanning image of size 640x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1920 bytes... [pixma] Reader task started [pixma] [pixma] pixma_scan(): start [pixma] line_size=1920 image_size=1683840 channels=3 depth=8 [pixma] dpi=75x75 offset=(0,0) dimension=640x877 [pixma] gamma_table=0x8ade184 source=0 [pixma] raw_width = 640 [pixma] OUT T=3.565 len=10 [pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 [pixma] [pixma] IN T=3.567 len=14 [pixma] 00000000:06 06 03 00 00 41 03 00 41 10 00 00 00 68 [pixma] [pixma] Current status: paper=0 cal=0 lamp=16 [pixma] Current status: paper=0 cal=0 lamp=16 [pixma] OUT T=3.568 len=20 [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 [pixma] 00000010:00 00 00 ff [pixma] [pixma] IN T=3.575 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=3.575 len=20 [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 04 00 00 [pixma] 00000010:00 00 00 fb [pixma] [pixma] IN T=3.582 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=3.598 len=10 [pixma] 00000000:db 20 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=3.633 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=3.633 len=21 [pixma] 00000000:dd 20 00 00 00 00 00 00 0b 00 01 00 00 00 00 00 [pixma] 00000010:00 00 00 00 ff [pixma] [pixma] BUG:Unmapped SANE Status code 5 [pixma] IN T=3.636 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 8 sec. [pixma] IN T=4.640 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 7 sec. [pixma] IN T=5.645 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 6 sec. [pixma] IN T=6.646 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 5 sec. [pixma] IN T=7.648 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 4 sec. [pixma] IN T=8.652 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 3 sec. [pixma] IN T=9.653 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 2 sec. [pixma] IN T=10.657 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 1 sec. [pixma] WARNING:Error in response phase. cmd:404a [pixma] If the scanner hangs, reset it and/or unplug the USB cable. [pixma] OUT T=10.657 len=10 [pixma] 00000000:ef 20 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=10.663 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=10.663 len=10 [pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 [pixma] [pixma] IN T=10.667 len=14 [pixma] 00000000:06 06 03 01 00 41 03 00 41 10 00 01 00 66 [pixma] [pixma] Current status: paper=1 cal=0 lamp=16 [pixma] Current status: paper=1 cal=0 lamp=16 [pixma] OUT T=10.668 len=10 [pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 [pixma] [pixma] IN T=10.670 len=14 [pixma] 00000000:06 06 03 01 00 41 03 00 41 10 00 01 00 66 [pixma] [pixma] Current status: paper=1 cal=0 lamp=16 [pixma] Current status: paper=1 cal=0 lamp=16 [pixma] OUT T=10.670 len=20 [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 [pixma] 00000010:00 00 00 ff [pixma] [pixma] IN T=10.674 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=10.674 len=10 [pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 [pixma] [pixma] IN T=10.677 len=14 [pixma] 00000000:06 06 03 01 00 41 03 00 41 10 00 01 00 66 [pixma] [pixma] Current status: paper=1 cal=0 lamp=16 [pixma] Current status: paper=1 cal=0 lamp=16 [pixma] pixma_scan() failed ETIMEDOUT [pixma] Reader task terminated: ETIMEDOUT [pixma] read_image():reader task closed the pipe:0 bytes received, 1683840 bytes expected FAIL Error: Error during device I/O [pixma] pixma_close(): Canon imageCLASS MF4690 $ 2009/1/17 Nicolas Martin <nicolas.martin at freesurf.fr> > This Multifunction scanner should be candidate to be handled by the > pixma backend, where it is declared. > > In order to check what's going on, could you run scanimage as follows: > > $ export SANE_DEBUG_PIXMA=10 > $ scanimage -T > > and send back the content of the console. > > Nicolas > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20090117/254fd592/attachment.htm
