did you try it as root, just in case it is a permissions issue? allan
On Thu, Jan 7, 2010 at 4:17 AM, Albrecht Beck <albrecht.beck at arcor.de> wrote: > Hi, > > I'm trying to get the Umax 2000U running with Ubuntu 9.10. Unfortunately > it doesn't work: > > albrecht at calculus:~$ lsusb > Bus 005 Device 002: ID 1606:0030 Umax [hex] Astra 2000U > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > albrecht at calculus:~$ sane-find-scanner > > ?# sane-find-scanner will now attempt to detect your scanner. If the > ?# result is different from what you expected, first make sure your > ?# scanner is powered up and properly connected to your computer. > > ?# No SCSI scanners found. If you expected something different, make > sure that > ?# you have loaded a kernel SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x1606, product=0x0030, chip=PV8630/LM9830) at > libusb:005:002 > ?# Your USB scanner was (probably) detected. It may or may not be > supported by > ?# SANE. Try scanimage -L and read the backend's manpage. > > ?# Not checking for parallel port scanners. > > ?# Most Scanners connected to the parallel port or other proprietary > ports > ?# can't be detected by this program. > > ?# You may want to run this program as root to find all devices. Once > you > ?# found the scanner devices, be sure to adjust access permissions as > ?# necessary. > > albrecht at calculus:~$ SANE_DEBUG_UMAX1220U=128 scanimage -L > > [sanei_debug] Setting debug level of umax1220u to 128. > [umax1220u] sane_init: version_code != 0, authorize != 0 > [umax1220u] sane_init: SANE umax1220u backend version 1.0.2 from > sane-backends 1.0.20 > [umax1220u] reading configure file umax1220u.conf > [umax1220u] attach_matching_devices(usb 0x1606 0x0010) > [umax1220u] attach_matching_devices(usb 0x1606 0x0030) > [umax1220u] attach_scanner: libusb:005:002 > [umax1220u] attach_scanner: opening libusb:005:002 > [umax1220u] UMAX_open_device: `libusb:005:002' > [umax1220u] UMAX_open_device: Scanner is a 2000U. Expect color > problems :) > [umax1220u] csend: cmd = 0 > [umax1220u] usync: len = 0, cmd = 0 > [umax1220u] Failure on line of umax1220u-common.c: 394 > [umax1220u] UMAX_close_device: > [umax1220u] Failure on line of umax1220u-common.c: 2359 > [umax1220u] ERROR: attach_scanner: opening libusb:005:002 failed > [umax1220u] attach_matching_devices(usb 0x1606 0x0130) > [umax1220u] attach_matching_devices(/dev/scanner) > [umax1220u] attach_scanner: /dev/scanner > [umax1220u] attach_scanner: opening /dev/scanner > [umax1220u] UMAX_open_device: `/dev/scanner' > [umax1220u] UMAX_open_device: couldn't open device `/dev/scanner': > Invalid argument > [umax1220u] ERROR: attach_scanner: opening /dev/scanner failed > [umax1220u] attach_matching_devices(/dev/usb/scanner0) > [umax1220u] attach_scanner: /dev/usb/scanner0 > [umax1220u] attach_scanner: opening /dev/usb/scanner0 > [umax1220u] UMAX_open_device: `/dev/usb/scanner0' > [umax1220u] UMAX_open_device: couldn't open device `/dev/usb/scanner0': > Invalid argument > [umax1220u] ERROR: attach_scanner: opening /dev/usb/scanner0 failed > [umax1220u] finished reading configure file > [umax1220u] sane_get_devices(local_only = 0) > [umax1220u] sane_exit > > > > Can anybody help? > > Regards, > Albrecht > > > > > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > ? ? ? ? ? ? to sane-devel-request at lists.alioth.debian.org > -- "The truth is an offense, but not a sin"
