Here ist the log from USBLog
Gernot Hassenpflug schrieb: > On Thu, Mar 25, 2010 at 6:53 PM, <forum at coolpixx.de> wrote: > >> Here is a log: >> > /../ > >> [pixma] pixma_scan(): start >> [pixma] line_size=1920 image_size=1683840 channels=3 depth=8 >> [pixma] [pixma] Reader task id=1026 (threaded) >> scanimage: scanning image of size 640x877 pixels at 24 bits/pixel >> scanimage: acquiring RGB frame >> P6 >> # SANE data follows >> 640 877 >> 255 >> dpi=75x75 offset=(0,0) dimension=640x877 >> [pixma] gamma_table=0x4221c4 source=0 >> [pixma] raw_width = 640 >> [pixma] OUT T=3.550 len=10 >> [pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 >> [pixma] >> [pixma] IN T=3.556 len=14 >> [pixma] 00000000:06 06 03 01 00 41 03 00 41 00 00 00 00 77 >> [pixma] >> [pixma] Current status: paper=1 cal=0 lamp=0 >> [pixma] Current status: paper=1 cal=0 lamp=0 >> [pixma] OUT T=3.557 len=20 >> [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 >> [pixma] 00000010:00 00 00 ff >> [pixma] >> [pixma] IN T=3.573 len=2 >> [pixma] 00000000:06 06 >> [pixma] >> [pixma] OUT T=3.576 len=20 >> [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 04 00 00 >> [pixma] 00000010:00 00 00 fb >> [pixma] >> [pixma] IN T=3.587 len=2 >> [pixma] 00000000:06 06 >> [pixma] >> [pixma] OUT T=3.597 len=10 >> [pixma] 00000000:db 20 00 00 00 00 00 00 00 00 >> [pixma] >> [pixma] IN T=3.653 len=2 >> [pixma] 00000000:06 06 >> [pixma] >> [pixma] OUT T=3.662 len=20 >> [pixma] 00000000:dd 20 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 >> [pixma] 00000010:00 00 00 ff >> [pixma] >> [pixma] IN T=3.672 len=2 >> [pixma] 00000000:06 06 >> [pixma] >> [pixma] OUT T=3.694 len=56 >> [pixma] 00000000:de 20 00 00 00 00 00 00 2e 00 00 00 00 00 10 4b >> [pixma] 00000010:10 4b 00 00 00 00 00 00 00 00 00 00 02 80 00 00 >> [pixma] 00000020:03 6d 08 18 00 00 00 00 00 7f ff 00 00 81 00 00 >> [pixma] 00000030:00 00 00 00 00 00 00 39 >> [pixma] >> [pixma] IN T=3.723 len=2 >> [pixma] 00000000:06 06 >> [pixma] >> [pixma] OUT T=3.724 len=11 >> [pixma] 00000000:d4 20 00 00 00 00 00 00 00 00 06 >> [pixma] >> [pixma] IN T=13.733 len=-9 >> [pixma] ERROR: ETIMEDOUT >> [pixma] >> [pixma] No response yet. Timed out in 8 sec. >> [pixma] IN T=23.735 len=-9 >> [pixma] ERROR: ETIMEDOUT >> [pixma] >> [pixma] No response yet. Timed out in 7 sec. >> [pixma] IN T=33.745 len=-9 >> [pixma] ERROR: ETIMEDOUT >> [pixma] >> [pixma] No response yet. Timed out in 6 sec. >> [pixma] IN T=43.756 len=-9 >> [pixma] ERROR: ETIMEDOUT >> [pixma] >> [pixma] No response yet. Timed out in 5 sec. >> > > There was a discussion here, since the MF3110 seems to use a different > protocol to the other imageclass devices: > http://lists.alioth.debian.org/pipermail/sane-devel/2009-August/025221.html > > Here you can see that the printer is declared in the backend to get it > to be recognized, but it is not tested to work properly (at that > time): > http://www.sane-project.org/man/sane-pixma.5.html > > > So perhaps the printer expects something else to be done in addition > to what the current protocol implements for it. In that case a Windows > UsbSnoop log of hte same scan type would be necessary. Can you get > one? (see above thread). > > Regards, > Gernot > > -------------- next part -------------- A non-text attachment was scrubbed... Name: USBLog1 Canon MF3110.usblog Type: application/octet-stream Size: 12810 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100325/00a68e9e/attachment-0001.obj>
