Hi, I have an HP ScanJet 6300c that I've been using successfully with sane for some time now.
I have a problem when I use the XPA. With the XPA, the scanner takes a LONG time (it waits for the XPA lamp to warm up) to handle scan requests. The problem is that sane timeouts with an I/O error before the scanner is ready. When the scanner is ready (you can hear it attempt to start the scan), sane is no longer listening. This scanner has both SCSI & USB interfaces. I've used this scanner with XPA & sane many years ago with the SCSI interface -- it worked with SCSI. I'm using the USB interface now. I did some searching on the Internet and I didn't see any definite answer. I don't know if this is a sane issue or a USB one. dmesg and /var/log/messages yield no error messages or warnings. I use OpenSUSE 11.1 with the following packages: # rpm -qa |grep sane sane-frontends-1.0.14-302.35 xsane-0.995-131.35 sane-backends-autoconfig-1.0.19-99.1 sane-backends-1.0.19-99.1 Any help would be greatly appreciated. Regards, Erik
