I have essentially the same problem on my HP 8250 scanners. The only effective workaround is to power down the scanner, connect to an XP (or other M$ product with HP drivers installed), and start up the wizard. It manages to take the scanner out of the error 15 state, and I can move along until the next paper jam or other error condition.
On Mon, Jul 5, 2010 at 10:07 PM, Marius Ruth <marius.ruth at gmail.com> wrote: > Hi list, > > I have a very annoying issue with the HP ScanJet 8270 I bought a few days > ago. > Although normal scanning works great when I try to use the feeder > (ADF) I get this error: > "Scanner cover is open" > Obviously, the scanner cover is NOT open. I search everywhere for a > solution but there seems to be none that will work. > Scanner is running properly in Diagnostic mode. > I've also tried what this person suggested with no luck: > > http://lists.alioth.debian.org/pipermail/sane-devel/2005-December/015797.html > > I'm running CentOS release 5.5, kernel 2.6.18-194.el5. > *sane* packages from RPM will not detect the scanner so I compiled it > from source code. > I've tested with the latest stable versions: > sane-backends-1.0.21, > sane-frontends-1.0.14, > xsane-0.996 > > and with the latest development release: > sane-backends-git20100705.tar.gz > sane-frontends-git20100705.tar.gz > > The error message I get in sane for both is: "Scanner cover is open" > The error I see on the HP scanner LCD is "Error 15" > Scanner is connected via USB. > I've tried with xscan, scanimage -b, scanadf (all with same results, > the issue is definitely with sane and not the frontends.. i think) > I've also tried to play with the sourcecode of the "avision" lib > quickly commenting the "cover open status" checks and calls, still no > luck. I'll try to debug the code tomorrow but until then i'd really > like to know if anybody over here can help me out please. > > My theory is that the adf is not properly initialized and this is why > the feeder scanning fails. I can hear a noise comming from the feeder > when I issue the command to scan but it dies with the "scanner cover > is open" error message after ~5 seconds. > > I've uploaded a full debug log here: http://pastebin.com/HXzhMPsu > Relevant snapshot from debug run follows: > > [avision] avision_usb_status: Needs to request sense! > [avision] sense_handler: > [avision] sense_handler: data: > [avision] [0] 11110000b 360o 240d f0x > [avision] [1] 00000000b 0o 0d 0x > [avision] [2] 00000011b 3o 3d 3x > [avision] [3] 00000000b 0o 0d 0x > [avision] [4] 00000000b 0o 0d 0x > [avision] [5] 00000000b 0o 0d 0x > [avision] [6] 00000000b 0o 0d 0x > [avision] [7] 00001110b 16o 14d ex > [avision] [8] 00000000b 0o 0d 0x > [avision] [9] 00000000b 0o 0d 0x > [avision] [10] 00000000b 0o 0d 0x > [avision] [11] 00000000b 0o 0d 0x > [avision] [12] 10000000b 200o 128d 80x > [avision] [13] 00000010b 2o 2d 2x > [avision] [14] 00000000b 0o 0d 0x > [avision] [15] 00000000b 0o 0d 0x > [avision] [16] 00000000b 0o 0d 0x > [avision] [17] 00000000b 0o 0d 0x > [avision] [18] 00000000b 0o 0d 0x > [avision] [19] 00000000b 0o 0d 0x > [avision] [20] 00000000b 0o 0d 0x > [avision] [21] 00000000b 0o 0d 0x > [avision] sense_handler: sense code: MEDIUM ERROR (mostly ADF) > [avision] sense_handler: scan has not yet been completed > [avision] sense_handler: correct logical length > [avision] sense_handler: sense code: ADF cover open > [avision] reader_process: start_scan faild: Scanner cover is open > [avision] sane_read: got 0 bytes, err: 0 Success > [avision] do_eof: > [avision] do_eof: returning 8 > [avision] sane_cancel: > > > Please advise, > Thanks, > M > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100706/7e75445d/attachment-0001.htm>
