Hello I beg your pardon for my English, because I use an automatic translator.
Available HP scanjet 5590 FreeBSD 8.2-RELEASE amd64 sane-backends-1.0.21_2 installed from fresh ports and follow the instructions http://www.freebsd.org/doc/ru/books/handbook/scanners.html I get the following result: sane-find-scanner -q found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1705 [hp scanjet scanner], chip=HP4500C/4570C/5500C/5550C/5590/7650) at libusb:/dev/usb:/dev/ugen7.2 The first launch: scanimage -L device `hp5590:libusb:/dev/usb:/dev/ugen7.2' is a HP 5590 Workgroup scanner Subsequent launches: scanimage -L [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification failed: expected 0x0012, got 0x00e8 And finally launched: SANE_DEBUG_HP5590=50 scanimage -L sanei_debug] Setting debug level of hp5590 to 50. [hp5590] SANE backed for HP ScanJet 4500C/4570C/5500C/5550C/5590/7650 1.0.5 [hp5590] (c) Ilia Sotnikov <hostcc at gmail.com> [hp5590] attach_usb_device: Opening USB device [hp5590] attach_usb_device: USB device opened [hp5590] hp5590_init_scanner [hp5590] hp5590_cmd: USB-in-USB: command : 0012 [hp5590] hp5590_control_msg: USB-in-USB: core data: no [hp5590] hp5590_control_msg: USB-in-USB: sending control msg [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control message [hp5590] hp5590_get_ack [hp5590] hp5590_get_ack: USB-in-USB: accepted [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was acknowledged [hp5590] hp5590_get_ack [hp5590] hp5590_get_ack: USB-in-USB: accepted [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested [hp5590] hp5590_control_msg: USB-in-USB: core data: no [hp5590] hp5590_control_msg: USB-in-USB: sending control msg [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control message [hp5590] hp5590_get_ack [hp5590] hp5590_get_ack: USB-in-USB: accepted [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was acknowledged [hp5590] hp5590_get_ack [hp5590] hp5590_get_ack: USB-in-USB: accepted [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 12e8, last command: 00e8, core status: 0012 [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification failed: expected 0x0012, got 0x00e8 [hp5590] sane_hp5590_get_devices, local only: 0 [hp5590] Found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [hp5590] sane_hp5590_exit Probably because of these problems the program finds no Scanlite scanning devices and, accordingly, I can not use the scanner. Please help me to run the HP scanjet 5590 fine Thank you very much -- ? ?????????, ??????? ?????? ?????????? ???. | +7 383 267 13 02 ???. | +7 960 784 00 60 E-mail | rednikov at ngs.ru Web | sysblog.krasnov.me
