Good work to Manuel and Ilia!? I hope to try the patch myself this weekend.
Juanito P.S.? Manuel gets the same error with paper longer than about 14" as I do with Windows.? Also, the HP documentation correctly states that the ADF will scan both sides of letter (or presumably A4) but won't do legal.? It gives the same "Paper Jam" message, even though there is no jam. **************************************************** --- El vie 25-feb-11, Manuel <mixkeysweis18 at yahoo.com> escribi?: De: Manuel <mixkeysweis18 at yahoo.com> Asunto: Re: [hp5590] PATCH: enhance allowed ADF image height A: "Juanito Hunter" <tshunter001 at yahoo.com.mx>, "Ilia Sotnikov" <hostcc at gmail.com> Cc: "sane-devel" <sane-devel at lists.alioth.debian.org> Fecha: viernes, 25 de febrero de 2011, 10:58 Hi Ilia, and Juanito i did the following tests today For the test I draw rules on the pages for reference. Before apply the patch: Hardware Specs: Operating System: Ubuntu 10.04 32bits Scanner: HP5590 Software: Sane version --- >? 1.0.14-9 (From the repos) sane-backends --- > 1.0.20 (From the repos) Frontends: scanimage, xsane, simple-scan, gscan2pdf. Pages Tested: Size: 215mm x 297mm --> All OK, no errors Size: 215mm x 304mm --> error the page exceed the height Y limit Size: 215mm x 356mm --> error the page exceed the height Y limit Size: 215mm x 381mm --> error the page exceed the height Y limit After apply the patch: Hardware Specs: Operating System: Ubuntu 10.04 32bits Scanner: HP5590 Software: Sane version --- >? 1.0.14-9 (From the repos) scanimage (sane-backends) --- > 1.0.22 (From the source, and patched) Note: I had to uninstall the old sane-backend to avoid versions conflicts the other method not work for me, something miss Frontend: scanimage Pages Tested: Size: Letter (215mm x 297mm --> All OK, no errors Size: LetterS (215mm x 304mm) --> All OK, no errors Size: Legal (215mm x 356mm) --> All OK, no errors Size: 8.5X15 in (215mm x 381mm) --> Output image height is ok up to (14.25 in), the rest in blank and results paper jam. I guess pages sizes greater than Legal? will give the same result However for me, it works and it's all I needed Ilia, so really really thanks for you support Any help that you need to try something ..just let me know.. Best regards Manuel, Panama --- On Fri, 25/2/11, Ilia Sotnikov <hostcc at gmail.com> wrote: From: Ilia Sotnikov <[email protected]> Subject: Re: [hp5590] PATCH: enhance allowed ADF image height To: "Juanito Hunter" <tshunter001 at yahoo.com.mx>, "Manuel" <mixkeysweis18 at yahoo.com> Cc: "sane-devel" <sane-devel at lists.alioth.debian.org> Date: Friday, 25 February, 2011, 7:37 AM Juanito, Manuel, thanks for your feedback. Most easiest way is to get SANE backends snapshots from http://www.sane-project.org/snapshots/, the file will be named sane-backends-gitYYYYMMDD.tar.gz. Next, to quickly experiment without touching system libraries, you could use the following procedure installing SANE backends in a temporary place: - unpack them to any directory - cd to that directory - apply this patch using 'patch -p1 <? sane-backend-hp5590-adf-height.diff' - configure && make - make DESTDIR=<some dir> install. The backends will be installed into <some dir> - that could be $HOME/tmp or anyhing you prefer - prepend LD_LIBRARY_PATH to scanimage/xsane/whatever_frontend_you_prefer to point to that directory. Eg. (assuming you ran configure with --prefix=/usr/local and that you installed backends into $HOME/tmp): LD_LIBRARY_PATH=$HOME/tmp/usr/local/lib SANE_DEBUG_DLL=255 SANE_DEBUG_HP5590=255 scanimage <rest of command line>. SANE_DEBUG_DLL will give you a chance to see how backends are loaded and you could verify their locations (should be from $HOME/tmp/usr/local/lib in this example) - try to scan from ADF -- ?Ilia Sotnikov -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110225/d988ff38/attachment-0001.htm>
