Hello, I'm trying to get my scanner to use documents from the ADF. Using the 'normal mode' works fine. SANE claims it is an C6200C, but it should be 6270A. I guess the C instead of the A is the problem.
The problem: $ scanadf -v -o testscan scanadf: scanning image of size 2550x3507 pixels at 1 bits/pixel scanadf: acquiring gray frame Scanned document testscan [...] which will try to rescan the image from on the plate forever (I guess). I tried using --source ADF: $ scanadf -v -o testscan --source ADF Scanned 0 pages There are, of course, a few documents in the feeder. The scanner doesn't make any sound or other sign that it pretends to do something. Information: usb-devices extract: > T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=03f0 ProdID=0201 Rev=01.00 > S: Manufacturer=Hewlett-Packard > S: Product=HP ScanJet 6200C > S: SerialNumber=SG95R112FMHL > C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr=0mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) $ sane-find-scanner [...] found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0201 [HP ScanJet 6200C]) at libusb:004:005 [...] $ scanadf -L device `hp:libusb:004:005' is a Hewlett-Packard ScanJet 62x0C flatbed scanner scanimage -L returns the same With kind regards, -- Jille Timmermans
