Le vendredi 10 juin 2011 05:40:47, vous avez ?crit : > On Fri, Jun 10, 2011 at 12:38 PM, Wandrille Ronc? <vanvan at vanvan.cc> wrote: > > Le vendredi 10 juin 2011 05:11:27, vous avez ?crit : > >> On Fri, Jun 10, 2011 at 12:08 PM, Wandrille Ronc? <w at ndrille.fr> wrote: > >> > Le vendredi 10 juin 2011 04:17:54, vous avez ?crit : > >> >> On Fri, Jun 10, 2011 at 10:50 AM, VanVan <vanvan at vanvan.cc> wrote: > > Okay, so I compiled another time with ./configure -- enable-debug, and > > look at the pixma_mp150.c file, but there is no debug mode to activate > > inside. > > No, not compiling. Just running. > > We were talking about scanimage. And I told you to look at the man > page for sane-pixma and then set the debug env vars. > > Regards, > Gernot
Thanks. It worked via ethernet for my desktop computer. [sanei_debug] Setting debug level of pixma to 3. [pixma] pixma is compiled without pthread support. [pixma] pixma version 0.16.2 [pixma] sanei_bjnp_find_devices: [pixma] eth0 is IPv4 capable, sending broadcast.. [pixma] eth0 is IPv4 capable, sending broadcast.. [pixma] eth0 is IPv4 capable, sending broadcast.. [pixma] eth0 is IPv4 capable, sending broadcast.. [pixma] eth0 is IPv4 capable, sending broadcast.. [pixma] Found scanner at ip address: 192.168.1.10 [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass 2.1,IVEC;MDL:MG8100 series;CLS:IMAGE;DES:Canon MG8100 series;SOJ:BJNP2,BJNPe; [pixma] Scanner model = Canon MG8100 series [pixma] Found scanner at ip address: 192.168.1.10 [pixma] Scanner at bjnp://17CDEF000000.local:8612 detected, but it was added before, good! [pixma] Found scanner at ip address: 192.168.1.10 [pixma] Scanner at bjnp://17CDEF000000.local:8612 detected, but it was added before, good! [pixma] pixma_collect_devices() found Canon PIXMA MG8100 at bjnp://17CDEF000000.local:8612 [pixma] pixma_find_scanners() found 1 devices device `v4l:/dev/video0' is a Noname Camera virtual device device `pixma:MG8100_17CDEF000000' is a CANON Canon PIXMA MG8100 multi- function peripheral But not on my laptop [pixma] pixma is compiled with pthread support. [pixma] pixma version 0.16.2 [pixma] sanei_bjnp_find_devices: [pixma] wlan0 is IPv4 capable, sending broadcast.. [pixma] wlan0 is IPv4 capable, sending broadcast.. [pixma] wlan0 is IPv4 capable, sending broadcast.. [pixma] wlan0 is IPv4 capable, sending broadcast.. [pixma] wlan0 is IPv4 capable, sending broadcast.. [pixma] Found scanner at ip address: 192.168.1.10 [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass 2.1,IVEC;MDL:MG8100 series;CLS:IMAGE;DES:Canon MG8100 series;SOJ:BJNP2,BJNPe; [pixma] Scanner model = Canon MG8100 series [pixma] Found scanner at ip address: 192.168.1.10 [pixma] Scanner at bjnp://17CDEF000000.local:8612 detected, but it was added before, good! [pixma] Found scanner at ip address: 192.168.1.10 [pixma] Scanner at bjnp://17CDEF000000.local:8612 detected, but it was added before, good! [pixma] Found scanner at ip address: 192.168.1.10 [pixma] Scanner at bjnp://17CDEF000000.local:8612 detected, but it was added before, good! [pixma] pixma_find_scanners() found 0 devices scanimage: no SANE devices found This is strange, it is the same linux distribution, with the same "sane- backends" compile. It found the device, but seems to not add it. Have you an idee ? If it work on my desktop computer, I can assume that this is not a problem from the source code. I can scan real image, all worked from the desktop computer. So can I add the source code to the git repository to give to all the people a compatible driver for the MG8150 and some other ? Do I need some extra permissions or can I directly do that ? Thanks, W.R
