? ???, 21/09/2011 ? 05:45 +0200, stef ?????: > Le mercredi 21 septembre 2011 01:13:49 Bertie Coopersmith, vous avez ?crit : > > This is the output I have just obtained from my HP Scanjet 2400 on > > a usb port of my Dell Inspiron running Ubuntu:- > > > > ~# scanimage -L > > device `genesys:libusb:005:005' is a Hewlett Packard ScanJet 2400c flatbed > > scanner root at ubuntu:~# scanimage > xxx.pnp > > [genesys] WARNING: Your scanner is not fully supported or at least > > [genesys] had only limited testing. Please be careful and > > [genesys] report any failure/success to > > [genesys] sane-devel at lists.alioth.debian.org. Please provide as > > many [genesys] details as possible, e.g. the exact name of your > > [genesys] scanner and what does (not) work. > > scanimage: sane_start: Invalid argument > > root at ubuntu:~# > > > > Until yesterday I have been using my hp scanjet 2400 with drivers > > downloaded from www.elcot.in (Probably conversions of Windows > > .dll files. > > > > Then yesterday I had a struggle to get 'scanimage -L' to report > > that it had found a scanner. I guessed that SANE drivers had been > > provided from the Ubuntu repository via Update Manager. > > > > After rebooting and confirming with 'lsusb' that the scanner was > > being recognized as a usb device I finally got some output from > > 'scanimage -L'. However, it reported two drivers on the same usb > > port. This confirmed my hunch. Anyway I performed a > > successful test scan. > > > > Today I did some 'ls -l' commands in /usr/lib/sane which > > showed that the .so files from genesys were recent (and > > 'ls -lut' showed that they had been accessed yesterday) > > so I removed the Indian .so files. After that I'm always > > getting the output shown at the top. -- Even after I re-installed > > the drivers from India. - So now I should have both drivers but > > the indian ones were must recently installed (although their > > modification times are again old as to be expected from the .tgz > > extraction. The file etc/saned/dll.conf still has the entry 'hp2400' > > which is required by the Indian drivers). > > > > Please help. > > Bertie Coopersmith. > > Hello, > > current SANE development version has now full support for the HP2400. > If > you don't want the genesys backend, but use the 'elcot' one, you might have > to > comment out the genesys entry in dll.conf . > > Regards, > Stef >
Hello, You could also try using my PPA, which contains patched version of sane-backends 1.0.22 with full support for the hp2400. https://launchpad.net/~lion-simba/+archive/hp2400-genesys Regards, Alexey.
