For Samsung SCX-3205W driver needed xerox_mfp. So write all the internet.
The device is connected, the printer works.
# Sane-find-scanner
# Sane-find-scanner will now attempt to detect your scanner. If the
# Result is different from what you expected, first make sure your
# Scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# You have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor = 0x04e8 [Samsung Electronics Co., Ltd.],
product = 0x3441 [SCX-3200 Series]) at libusb: 001:003
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage-L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# Can't be detected by this program.
As if the scanner finds.
# Scanimage-L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
There is scanner.
Then add a line in the file / etc / sane.d / xerox_mfp.conf:
usb 0x04e8 0x3441
And in the file / etc/udev/rules.d/25-libsane.rules in the relevant
section added:
ATTRS {idVendor} == "04e8", ATTRS {idProduct} == "3441", MODE = "0664",
ENV {libsane_matched} = "yes"
# Service udevd restart
Check:
# Scanimage-L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
All online writing that should work, but I have in any ...
System ALTLinux p6
# Rpm-qa | grep sane
sane-frontends-1.0.14-alt3
libsane-1.0.22-alt1
xsane-gimp2-0.998-alt1
hplip-sane-3.11.1-alt2
xsane-0.998-alt1
libksane4-4.6.0-alt1
sane-1.0.22-alt1
# Rpm-ql libsane | grep xerox
/ Etc / sane.d / xerox_mfp.conf
/ Usr/lib/sane/libsane-xerox_mfp.so.1
/ Usr/lib/sane/libsane-xerox_mfp.so.1.0.22
/ Usr/share/man/man5/sane-xerox_mfp.5.gz
I decided to check out what makes scanimage-L
# Strace-o / tmp/1.txt scanimage-L
After reviewing the file, get the following .. scanimage opens the file
/ etc / sane.d / dll.conf, through all that is there. For simplicity,
the experiment I just left dll.conf xerox_mfp .. Linke Board of Rites /
usr/lib/sane/libsane-xerox_mfp.so.1, then collects all of the Old / sys
/ bus / usb / devices including / sys/bus/usb/devices/1-1 / (vendor_id
here = 04e8 and product_id = 3441), then open the file / etc / sane.d /
xerox_mfp.conf and issues that do not have the scanner ...
Prompt please where to dig.
Thanks...
?? ???????:
??? Samsung SCX-3205W ????? ??????? xerox_mfp. ??? ????? ??? ?????????.
?????????? ??????????, ??????? ????????.
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.],
product=0x3441 [SCX-3200 Series]) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
??? ?? ?????? ???????.
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
??? ???????.
????? ???????? ?????? ? ????? /etc/sane.d/xerox_mfp.conf:
usb 0x04e8 0x3441
? ? ???? /etc/udev/rules.d/25-libsane.rules ? ??????????????? ??????
???????:
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="3441", MODE="0664",
ENV{libsane_matched}="yes"
# service udevd restart
????????:
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
??? ????????? ????? ??? ?????? ????????, ? ? ???? ?? ? ?????...
??????? ALTLinux p6
# rpm -qa | grep sane
sane-frontends-1.0.14-alt3
libsane-1.0.22-alt1
xsane-gimp2-0.998-alt1
hplip-sane-3.11.1-alt2
xsane-0.998-alt1
libksane4-4.6.0-alt1
sane-1.0.22-alt1
# rpm -ql libsane | grep xerox
/etc/sane.d/xerox_mfp.conf
/usr/lib/sane/libsane-xerox_mfp.so.1
/usr/lib/sane/libsane-xerox_mfp.so.1.0.22
/usr/share/man/man5/sane-xerox_mfp.5.gz
????? ????????? ??? ?? ?????? scanimage -L
# strace -o /tmp/1.txt scanimage -L
?????? ????, ????? ?????????.. scanimage ????????? ????
/etc/sane.d/dll.conf, ?????????? ??? ??? ??? ????. ??? ????????
???????????? ? ? dll.conf ??????? ?????? xerox_mfp.. ??????? ????
/usr/lib/sane/libsane-xerox_mfp.so.1, ????? ???????? ??? ???? ??
/sys/bus/usb/devices ? ??? ????? ? /sys/bus/usb/devices/1-1/(???
vendor_id=04e8 ? product_id=3441), ????? ????? ????????? ????
/etc/sane.d/xerox_mfp.conf ? ?????? ??? ??? ???????...
?????????? ?????????? ???? ??????.
???????.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 1.txt
URL:
<http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20111230/42581e7c/attachment-0001.txt>
