I use suse linux 12.1 and use a HP 6100C scanner, the scanner used to work fine but stopped suddenly I don't no what the problem is and ask for help, me terminal says:
linux-wism:/home/henk # sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. found SCSI processor "HP C2520A 3644" at /dev/sg3 # Your SCSI scanner was detected. It may or may not be supported by SANE. Try # scanimage -L and read the backend's manpage. found USB scanner (vendor=0x0b3b [ZyDAS], product=0x5630 [USB2.0 WLAN]) at libusb:001:002 found USB scanner (vendor=0x046d, product=0x0920, chip=ICM532B?) at libusb:004:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. linux-wism:/home/henk # scanimage -L device `hp:/dev/sg3' is a Hewlett-Packard C2520A flatbed scanner linux-wism:/home/henk #
