Am 27.07.2012 20:56, schrieb Stef: > > now USB trouble in sight. I'm quite surprised there is no message > for sanei_usb_open() which is called from the UMAX_open_device() that > failed in your first message. What are the traces with: > > export SANE_DEBUG_UMAX1220U=128 > export SANE_DEBUG_SANEI_USB=128 > scanimage -L
Hallo Stef, thank you for your help again. Here's the output. There's no sanei_usb_open() . Kind regards, bernhard ------------------------------------------------------------------- export SANE_DEBUG_UMAX1220U=128 export SANE_DEBUG_SANEI_USB=128 scanimage -L [sanei_debug] Setting debug level of umax1220u to 128. [umax1220u] sane_init: version_code != 0, authorize != 0 [umax1220u] sane_init: SANE umax1220u backend version 1.0.2 from sane-backends 1.0.22 [sanei_debug] Setting debug level of sanei_usb to 128. [sanei_usb] sanei_usb_init: marking existing devices [sanei_usb] sanei_usb_init: Looking for kernel scanner devices [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory [sanei_usb] sanei_usb_init: Looking for libusb devices [sanei_usb] sanei_usb_init: device 0x1d6b/0x0002, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x1d6b/0x0002: no suitable interfaces [sanei_usb] sanei_usb_init: device 0x1d6b/0x0001, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x1d6b/0x0001: no suitable interfaces [sanei_usb] sanei_usb_init: device 0x093a/0x2510, interface 0 doesn't look like a scanner (0/3) [sanei_usb] sanei_usb_init: device 0x093a/0x2510: no suitable interfaces [sanei_usb] sanei_usb_init: device 0x1d6b/0x0001, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x1d6b/0x0001: no suitable interfaces [sanei_usb] sanei_usb_init: device 0x1d6b/0x0001, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x1d6b/0x0001: no suitable interfaces [sanei_usb] sanei_usb_init: found 0 devices [umax1220u] reading configure file umax1220u.conf [umax1220u] attach_matching_devices(usb 0x1606 0x0010) [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0010 [umax1220u] attach_matching_devices(usb 0x1606 0x0030) [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0030 [umax1220u] attach_matching_devices(usb 0x1606 0x0130) [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0130 [umax1220u] finished reading configure file [umax1220u] sane_get_devices(local_only = 0) No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [umax1220u] sane_exit -- GPG-Key available: GnuPG-2.0.12
