Output
root at GSI-000434:/home/val# scanimage --help
[sanei_debug] Setting debug level of dll to 0.
Usage: scanimage [OPTION]...
Start image acquisition on a scanner device and write image data to
standard output.
Parameters are separated by a blank from single-character options (e.g.
-d epson) and by a "=" from multi-character options (e.g.
--device-name=epson).
-d, --device-name=DEVICE use a given scanner device (e.g. hp:/dev/scanner)
--format=pnm|tiff file format of output file
-i, --icc-profile=PROFILE include this ICC profile into TIFF file
-L, --list-devices show available scanner devices
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the
output
can be specified: %d (device name), %v (vendor),
%m (model), %t (type), %i (index number), and
%n (newline)
-b, --batch[=FORMAT] working in batch mode, FORMAT is `out%d.pnm' or
`out%d.tif' by default depending on --format
--batch-start=# page number to start naming files with
--batch-count=# how many pages to scan in batch mode
--batch-increment=# increase page number in filename by #
--batch-double increment page number by two, same as
--batch-increment=2
--batch-prompt ask for pressing a key before scanning a page
--accept-md5-only only accept authorization requests using md5
-p, --progress print progress messages
-n, --dont-scan only set options, don't actually scan
-T, --test test backend thoroughly
-A, --all-options list all available backend options
-h, --help display this help message and exit
-v, --verbose give even more status messages
-B, --buffer-size=# change input buffer size (in kB, default 32)
-V, --version print version information
Options specific to device `genesys:libusb:002:002':
Scan Mode:
--mode Color|Gray|Lineart [Gray]
Selects the scan mode (e.g., lineart, monochrome, or color).
--source Flatbed|Transparency Adapter [inactive]
Selects the scan source (such as a document-feeder).
--preview[=(yes|no)] [no]
Request a preview-quality scan.
--depth 8|16 [8]
Number of bits per sample, typical values are 1 for "line-art" and 8
for multibit scans.
--resolution 2400|1200|600|300|150|100|75dpi [300]
Sets the resolution of the scanned image.
Geometry:
-l 0..213.8mm [0]
Top-left x position of scan area.
-t 0..300mm [0]
Top-left y position of scan area.
-x 0..213.8mm [213.8]
Width of scan-area.
-y 0..300mm [300]
Height of scan-area.
Enhancement:
--custom-gamma[=(yes|no)] [no]
Determines whether a builtin or a custom gamma-table should be used.
--gamma-table 0..65535,... [inactive]
Gamma-correction table. In color mode this option equally affects
the
red, green, and blue channels simultaneously (i.e., it is an
intensity
gamma table).
--red-gamma-table 0..65535,... [inactive]
Gamma-correction table for the red band.
--green-gamma-table 0..65535,... [inactive]
Gamma-correction table for the green band.
--blue-gamma-table 0..65535,... [inactive]
Gamma-correction table for the blue band.
--swdeskew[=(yes|no)] [no]
Request backend to rotate skewed pages digitally
--swcrop[=(yes|no)] [no]
Request backend to remove border from pages digitally
--swdespeck[=(yes|no)] [no]
Request backend to remove lone dots digitally
--despeck 1..9 (in steps of 1) [1]
Maximum diameter of lone dots to remove from scan
Extras:
--lamp-off-time 0..60 [15]
The lamp will be turned off after the given time (in minutes). A
value
of 0 means, that the lamp won't be turned off.
--threshold 0..100% (in steps of 1) [50]
Select minimum-brightness to get a white point
--threshold-curve 0..127 (in steps of 1) [50]
Dynamic threshold curve, from light to dark, normally 50-65
--disable-dynamic-lineart[=(yes|no)] [no]
Disable use of a software adaptive algorithm to generate lineart
relying instead on hardware lineart.
--disable-interpolation[=(yes|no)] [no]
When using high resolutions where the horizontal resolution is
smaller
than the vertical resolution this disables horizontal interpolation.
--color-filter Red|Green|Blue|None [None]
When using gray or lineart this option selects the used color.
Sensors:
Buttons:
--clear-calibration []
Clear calibration cache
Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.
List of available devices:
genesys:libusb:002:002
*Felipe Garc?a Mart?nez
Gerente de Sistemas Internos
Microformas, S.A. de C.V.
Tel. 11675219
Cel. 5510496939*
El presente mensaje de datos, contiene informaci?n confidencial que tambi?n
puede constituir un secreto industrial propiedad de MICROFORMAS, S.A. DE
C.V. y va dirigido al destinatario. Si usted no es el destinatario del
presente mensaje de datos, por este conducto, se le informa, para todos los
efectos a que haya lugar, que no cuenta con la autorizaci?n para divulgar,
usar, apoderarse, copiar, distribuir, reproducir y/o tomar cualquier acci?n
en relaci?n al contenido de este mensaje de datos, por lo cual, lo anterior
queda expresamente prohibido. Se le solicita que notifique inmediatamente
por correo electr?nico al remitente si usted recibi? este correo por error
y, adem?s, deber? de borrar este mensaje de datos de su sistema o
computadora o dispositivo.
La transmisi?n por medios electr?nicos no puede garantizar que sea segura o
libre de errores, toda vez que la informaci?n puede ser interceptada,
corrompida, alterada, destruida, llegar demorada o incompleta o contener
virus. Por tal motivo, el remitente no asume responsabilidad alguna por lo
anterior y si se requiere verificaci?n, hacerlo por tel?fono, a trav?s de
otro correo electr?nico, o bien, solicitar una versi?n escrita de manera
f?sica, a manera de confrmaci?n.
MICROFORMAS, S.A. DE C.V., Luz Savi?on 1558 Col. Narvarte, Del. Benito
Ju?rez C.P. 03020, M?xico D.F., www.microformas.com.mx
2012/12/6 m. allan noah <kitno455 at gmail.com>
> scanimage --help
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20121206/962a04f7/attachment.html>
