Joining the list to begin the process of developing a backend for an unlisted scanner.
Brother DSmobile 700D http://www.brother-usa.com/Scanners/ModelDetail/24/ds700d I am a competent C programmer. ;) Any advice and/or direction is appreciated. Here is the output* *of: *sudo sane-find-scanner -v -v * This is sane-find-scanner from sane-backends 1.0.22 # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. searching for SCSI scanners: checking /dev/scanner... failed to open (Invalid argument) checking /dev/sg0... failed to open (Invalid argument) checking /dev/sg1... failed to open (Invalid argument) checking /dev/sg2... failed to open (Invalid argument) checking /dev/sg3... failed to open (Invalid argument) checking /dev/sg4... failed to open (Invalid argument) checking /dev/sg5... failed to open (Invalid argument) checking /dev/sg6... failed to open (Invalid argument) checking /dev/sg7... failed to open (Invalid argument) checking /dev/sg8... failed to open (Invalid argument) checking /dev/sg9... failed to open (Invalid argument) checking /dev/sga... failed to open (Invalid argument) checking /dev/sgb... failed to open (Invalid argument) checking /dev/sgc... failed to open (Invalid argument) checking /dev/sgd... failed to open (Invalid argument) checking /dev/sge... failed to open (Invalid argument) checking /dev/sgf... failed to open (Invalid argument) checking /dev/sgg... failed to open (Invalid argument) checking /dev/sgh... failed to open (Invalid argument) checking /dev/sgi... failed to open (Invalid argument) checking /dev/sgj... failed to open (Invalid argument) checking /dev/sgk... failed to open (Invalid argument) checking /dev/sgl... failed to open (Invalid argument) checking /dev/sgm... failed to open (Invalid argument) checking /dev/sgn... failed to open (Invalid argument) checking /dev/sgo... failed to open (Invalid argument) checking /dev/sgp... failed to open (Invalid argument) checking /dev/sgq... failed to open (Invalid argument) checking /dev/sgr... failed to open (Invalid argument) checking /dev/sgs... failed to open (Invalid argument) checking /dev/sgt... failed to open (Invalid argument) checking /dev/sgu... failed to open (Invalid argument) checking /dev/sgv... failed to open (Invalid argument) checking /dev/sgw... failed to open (Invalid argument) checking /dev/sgx... failed to open (Invalid argument) checking /dev/sgy... failed to open (Invalid argument) checking /dev/sgz... failed to open (Invalid argument) # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. searching for USB scanners: checking /dev/usb/scanner... failed to open (Invalid argument) checking /dev/usb/scanner0... failed to open (Invalid argument) checking /dev/usb/scanner1... failed to open (Invalid argument) checking /dev/usb/scanner2... failed to open (Invalid argument) checking /dev/usb/scanner3... failed to open (Invalid argument) checking /dev/usb/scanner4... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner7... failed to open (Invalid argument) checking /dev/usb/scanner8... failed to open (Invalid argument) checking /dev/usb/scanner9... failed to open (Invalid argument) checking /dev/usb/scanner10... failed to open (Invalid argument) checking /dev/usb/scanner11... failed to open (Invalid argument) checking /dev/usb/scanner12... failed to open (Invalid argument) checking /dev/usb/scanner13... failed to open (Invalid argument) checking /dev/usb/scanner14... failed to open (Invalid argument) checking /dev/usb/scanner15... failed to open (Invalid argument) checking /dev/usbscanner... failed to open (Invalid argument) checking /dev/usbscanner0... failed to open (Invalid argument) checking /dev/usbscanner1... failed to open (Invalid argument) checking /dev/usbscanner2... failed to open (Invalid argument) checking /dev/usbscanner3... failed to open (Invalid argument) checking /dev/usbscanner4... failed to open (Invalid argument) checking /dev/usbscanner5... failed to open (Invalid argument) checking /dev/usbscanner6... failed to open (Invalid argument) checking /dev/usbscanner7... failed to open (Invalid argument) checking /dev/usbscanner8... failed to open (Invalid argument) checking /dev/usbscanner9... failed to open (Invalid argument) checking /dev/usbscanner10... failed to open (Invalid argument) checking /dev/usbscanner11... failed to open (Invalid argument) checking /dev/usbscanner12... failed to open (Invalid argument) checking /dev/usbscanner13... failed to open (Invalid argument) checking /dev/usbscanner14... failed to open (Invalid argument) checking /dev/usbscanner15... failed to open (Invalid argument) trying libusb: <device descriptor of 0x04f9/0x2051 at 002:005 (Brother DSmobile 700D)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 bDeviceSubClass 255 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x04F9 idProduct 0x2051 bcdDevice 7.03 iManufacturer 10 (Brother) iProduct 11 (DSmobile 700D) iSerialNumber 12 (0) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 160 (Remote Wakeup) MaxPower 500 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 bInterfaceSubClass 255 bInterfaceProtocol 255 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 2> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 8 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bcdUSB = 0x200) checking for GT-6816 ... this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255) checking for GT-8911 ... this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255) checking for MA-1015 ... this is not a MA-1015 (bcdUSB = 0x200) checking for MA-1509 ... this is not a MA-1509 (bcdUSB = 0x200) checking for LM983[1,2,3] ... this is not a LM983x (bcdUSB = 0x200) checking for GL646 ... this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255) checking for GL646_HP ... this is not a GL646_HP (bcdUSB = 0x200) checking for GL660+GL646 ... this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255) checking for GL84x ... <This USB chip looks like a GL848+ (result from sane-backends 1.0.22)> found USB scanner (vendor=0x04f9 [Brother], product=0x2051 [DSmobile 700D], chip=GL848+) at libusb:002:005 <device descriptor of 0x093a/0x2510 at 002:003> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x093A idProduct 0x2510 bcdDevice 1.00 iManufacturer 1 () iProduct 2 () iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 () bmAttributes 160 (Remote Wakeup) MaxPower 100 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 10 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x8087/0x0024 at 002:002> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x8087 idProduct 0x0024 bcdDevice 0.00 iManufacturer 0 () iProduct 0 () iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 12 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x1d6b/0x0002 at 002:001 (Linux 3.0.0-32-generic-pae ehci_hcd EHCI Host Controller)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0002 bcdDevice 3.00 iManufacturer 3 (Linux 3.0.0-32-generic-pae ehci_hcd) iProduct 2 (EHCI Host Controller) iSerialNumber 1 (0000:00:1d.0) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 12 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x0c45/0x6436 at 001:003 (LOEAAI10P2SF0181B605764 Sony Visual Communication Camera)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 bDeviceSubClass 2 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x0C45 idProduct 0x6436 bcdDevice 17.12 iManufacturer 2 (LOEAAI10P2SF0181B605764) iProduct 1 (Sony Visual Communication Camera) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 473 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 () bmAttributes 128 () MaxPower 500 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 14 bInterfaceSubClass 1 bInterfaceProtocol 0 iInterface 5 (Sony Visual Communication Camera) <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 3 (interrupt) wMaxPacketSize 16 bInterval 6 ms bRefresh 0 bSynchAddress 0 <interface 1> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 14 bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 5 (Sony Visual Communication Camera) <altsetting 1> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 14 bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 5 (isochronous) wMaxPacketSize 128 bInterval 1 ms bRefresh 0 bSynchAddress 0 <altsetting 2> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 14 bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 5 (isochronous) wMaxPacketSize 256 bInterval 1 ms bRefresh 0 bSynchAddress 0 <altsetting 3> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 14 bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 5 (isochronous) wMaxPacketSize 800 bInterval 1 ms bRefresh 0 bSynchAddress 0 <altsetting 4> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 14 bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 5 (isochronous) wMaxPacketSize 2848 bInterval 1 ms bRefresh 0 bSynchAddress 0 <altsetting 5> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 1 bInterfaceClass 14 bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 5 (isochronous) wMaxPacketSize 4896 bInterval 1 ms bRefresh 0 bSynchAddress 0 <altsetting 6> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 6 bNumEndpoints 1 bInterfaceClass 14 bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 5 (isochronous) wMaxPacketSize 5120 bInterval 1 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x8087/0x0024 at 001:002> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x8087 idProduct 0x0024 bcdDevice 0.00 iManufacturer 0 () iProduct 0 () iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 12 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x1d6b/0x0002 at 001:001 (Linux 3.0.0-32-generic-pae ehci_hcd EHCI Host Controller)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0002 bcdDevice 3.00 iManufacturer 3 (Linux 3.0.0-32-generic-pae ehci_hcd) iProduct 2 (EHCI Host Controller) iSerialNumber 1 (0000:00:1a.0) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 12 ms bRefresh 0 bSynchAddress 0 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. done * * -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20130328/06ce0bd9/attachment-0001.html>
