Hi Ajay, Please first install Sane as described in README.linux (within the source code or here: http://www.sane-project.org/README.linux).
Are you sure that you switched your scanner to "remote scanner" mode? If this doesn't help, please ask the mailing list. Cheers, Rolf Am 07.03.2014 14:53, schrieb Ajay Deo: > Hello, > > In my struggle of Canon ImageClass MF4820d scanner driver installation, > I came across the following website > > http://mp610.blogspot.in/2008/04/give-your-scanner-new-freshly-sane.html > > I followed the procedure but I am unable to get my scanner working. I > spent almost a whole day. Please can you help me. I am attaching some > information below to help you diagnose the problem. > > ======================== >> scanimage -V > scanimage (sane-backends) 1.0.25git; backend version 1.0.25 > >>scanimage -L > device `pixma:04A92773_112CH1101167' is a CANON Canon i-SENSYS MF4800 > Series multi-function peripheral > >>scanimage -T > scanimage: scanning image of size 640x877 pixels at 24 bits/pixel > scanimage: acquiring RGB frame, 8 bits/sample > scanimage: reading one scanline, 1920 bytes... FAIL Error: Device busy > > ======================= > > Please note that I am using Fedora 18 with 3.11.10-100.fc18.x86_64 kernal. > I have modified "configure" file so that the libraries will be installed > under "/usr/lib64". > > Also, I see the attached file which might be helpful. > > Any help in this matter will be greatly appreciated. > > Thanking you. > > With best regards, > > Ajay > > > ======================== > Dr. Ajay Y. Deo > Assistant Professor > Department of Physics > Indian Institute of Technology Roorkee > Roorkee - 247667 > Uttarakhand, INDIA > ============================ > >
