Hi Mehmet, You're scanning via LAN/WLAN.
Please connect to USB only and try again. We should test duplex scan in this order: (1) USB only (2) LAN/WLAN, after (1) is working Cheers, Rolf Am 29.08.2014 um 14:21 schrieb Mehmet Giritli: > I set the scan size to 1cm * 1cm as you asked. Set the source to ADF > Duplex and here are the logs. > > I had the problem I initially mentioned. ADF Duplex does not scan two > sides and after scanning one side, printer gets stuck. > > > On Thu, 2014-08-28 at 20:04 +0200, Rolf Bensch wrote: >> Hi Mehmet, >> >> I guess that there's a problem when the original is shorter than 14". >> >> Please set the original size or a smaller scan area in xsane and try again. >> >> In the preview window you can select the scan area with the left mouse >> button or with the "Present area" drop down menu. Or you can open >> standard options window (Ctrl+5). >> >> Please send me the log file. >> >> Cheers, >> Rolf >> >> >> Am 28.08.2014 um 08:53 schrieb Mehmet Giritli: >>> Here is the log file anyway. I don't know what you mean by setting scan >>> area? There is no such option with xsane as far as I can see. >>> >>> Regards. >>> >>> On Wed, 2014-08-27 at 22:27 +0200, Rolf Bensch wrote: >>>> Hi Mehmet, >>>> >>>> Please create a usb dump file for me (on the console): >>>> >>>> (1) export SANE_DEBUG_PIXMA=11 >>>> (2) xsane &> pixma.log >>>> >>>> To reduce the file size, please set a small scan area of approx. 10 x >>>> 10mm. And compress the file, e.g. with 7-zip. >>>> >>>> The mailing list will reject your response if the attachment is too big. >>>> Anyway, please add the mailing list to cc. >>>> >>>> Cheers, >>>> Rolf >>>> >>>> >>>> >>>> Am 27.08.2014 um 13:47 schrieb Mehmet Giritli: >>>>> Hi, >>>>> >>>>> I just tested the latest git snapshot and I am having problems with adf >>>>> duplex scanning option using xsane. When adf duplex is chosen, it scans >>>>> one side alone and then it gets stuck and the printer display says >>>>> "Scanning document.." while nothing happens... >>>>> >>>>> After this point sane does not work anymore. Cancel button does not work >>>>> on the printer and I have to turn off and back on the printer >>>>> afterwards. >>>>> >>>>> Any ideas? >>>>> >>>>> Regards. >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> > > -- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
