Lets get a debug log: SANE_DEBUG_EPJITSU=15 scanimage -L 2>s1300i.log
then send me that log file. allan On Sun, Sep 14, 2014 at 1:29 PM, Mark Drew <[email protected]> wrote: > Allan, > > Thanks for the fast response, but I'd already done that: > >> [mark@PotableLinux ~]$ ll /usr/share/sane/epjitsu/ >> total 68K >> -rw-rw-r--. 1 root root 65K Sep 13 22:06 1300i_0D12.nal > > > And from my /etc/sane.d/epjitsu.conf: > >> # Fujitsu S1300i >> firmware /usr/share/sane/epjitsu/1300i_0D12.nal >> usb 0x04c5 0x128d > > > Can you think of anything else I might be missing? > > Thanks! > Mark > > On Sun, Sep 14, 2014 at 6:08 AM, M. Allan Noah <[email protected]> wrote: >> >> You need to extract the firmware from the windows driver and put it where >> sane can reach it. See /etc/sane.d/epjitsu.conf >> >> allan >> >> On Sep 14, 2014, at 3:04 AM, Mark Drew <[email protected]> wrote: >> >> All, >> >> I downloaded the latest git snapshot of the sane backend (1.0.25git) and >> built it from source according to the instructions in README and >> README.linux. Everything went smoothly until I got to the point of trying >> 'scanimage -L'. What I don't understand (and would like help with) is why >> sane-find-scanner will find my scanner (with or without root), but scanimage >> -L will not (with or without root). >> >> When I was using the 1.0.23 distribution from yum repos, I was able to get >> the scanner recognized by both of these commands (but the my scanner wasn't >> supported at all by that version). Now I can only get sane-find-scanner to >> recognize my scanner. >> >>> [mark@PotableLinux ~]$ uname -a >>> Linux PotableLinux 3.9.10-100.fc17.x86_64 #1 SMP Sun Jul 14 01:31:27 UTC >>> 2013 x86_64 x86_64 x86_64 GNU/Linux >>> [mark@PotableLinux ~]$ cat /etc/redhat-release >>> Fedora release 17 (Beefy Miracle) >> >> >> Here's the output from sane-find-scanner: >> >>> [mark@PotableLinux ~]$ sane-find-scanner -v >>> This is sane-find-scanner from sane-backends 1.0.25git >>> >>> ... >>> >>> checking /dev/usbscanner14... failed to open (Invalid argument) >>> checking /dev/usbscanner15... failed to open (Invalid argument) >>> found USB scanner (vendor=0x046d, product=0x08ae) at libusb:001:005 >>> found USB scanner (vendor=0x04c5 [FUJITSU], product=0x128d [ScanSnap >>> S1300i]) at libusb:002:007 >>> # Your USB scanner was (probably) detected. It may or may not be >>> supported by >>> # SANE. Try scanimage -L and read the backend's manpage. >>> >>> # Not checking for parallel port scanners. >>> >>> # Most Scanners connected to the parallel port or other proprietary >>> ports >>> # can't be detected by this program. >>> >>> # You may want to run this program as root to find all devices. Once >>> you >>> # found the scanner devices, be sure to adjust access permissions as >>> # necessary. >>> done >> >> >> And here's scanimage: >> >>> [mark@PotableLinux ~]$ scanimage -V >>> scanimage (sane-backends) 1.0.25git; backend version 1.0.25 >>> [mark@PotableLinux ~]$ scanimage -L >>> >>> No scanners were identified. If you were expecting something different, >>> check that the scanner is plugged in, turned on and detected by the >>> sane-find-scanner tool (if appropriate). Please read the documentation >>> which came with this software (README, FAQ, manpages). >>> [mark@PotableLinux ~]$ sudo scanimage -L >>> >>> No scanners were identified. If you were expecting something different, >>> check that the scanner is plugged in, turned on and detected by the >>> sane-find-scanner tool (if appropriate). Please read the documentation >>> which came with this software (README, FAQ, manpages). >> >> >> Any help would be greatly appreciated! >> >> Thanks! >> Mark >> >> >> -- >> sane-devel mailing list: [email protected] >> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel >> Unsubscribe: Send mail with subject "unsubscribe your_password" >> to [email protected] > > -- "well, I stand up next to a mountain- and I chop it down with the edge of my hand" -- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
