Hum, my idea was to install EVERYTHING from git. The backend and the
frontend. And if you do so, you have to remove all standard packages
from your ubuntu install to avoid conflicts (I should have been more
precise for sure).
Le 17/11/2014 18:38, Pierre LINDENBAUM a écrit :
This is not the location of the regularly installed libsane package.>
You have installed something compiled from source as well. This is
often a source of problems. Is there any particular reason you need
to use this self-built version?
Guillaume suggested to install libsane from the git repo. I used the
default options for ./configure that is --prefix=/usr/local
If you end up using the dll backend from /usr/local/lib/sane/ it will
in all likelihood *not* read the configuration in /etc/sane.d/.
you're right ! I've added a debug message in '/etc/epson.conf'.
Running iscan with some debug flags prints the message
(...)
[epson] sane_init, ># epson.conf<
[epson] sane_init, ># HELLO I'm IN /usr/local !<
(...)
I copied all '*.conf' from /usr/local/etc/sane.d/*.conf to /etc/sane.d
$ sudo scanimage -L
device `epson:libusb:002:003' is a Epson flatbed scanner
$ sudo sane-find-scanner | grep USB
found USB scanner (vendor=0x04b8 [EPSON], product=0x0116 [EPSON
Scanner]) at libusb:002:003
# Your USB scanner was (probably) detected. It may or may not be
supported by
From what I see iscan loads the latest libraries from /usr/local/lib
Still a problem: I've copied the full debug trace of iscan in:
https://gist.github.com/lindenb/bc7b85f7a4bf71ff500f
please note that the trace contains some non-ascii chars (replaced
here with '####' below :):
(...)
[epson] code 15
[epson] type ####0x01
[epson] level 0x00
[epson] no option equipment installed
[epson] Unknown type #####or level , using B3
(...)
It is non-free in the sense that the source is not made available.
I see
Another comment: there is no /dev/usb , all is found under /dev/bus/usb
$ ls -la /dev/bus/usb/002/
total 0
drwxr-xr-x 2 root root 80 Nov 17 17:52 .
drwxr-xr-x 9 root root 180 Nov 17 17:52 ..
crw-rw-r-- 1 root root 189, 128 Nov 17 18:34 001
crw-rw-r-- 1 root root 189, 130 Nov 17 18:34 003
thank you for your help.
Pierre
--
sane-devel mailing list: [email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
