I am running Mepis 12 (Debian derived) with xsane 0.998-3+b1.
My scanner is an HP Officejet 6700 All-In-One.
The printer is connected by wireless, the scanner by usb.
This scanner used to work, what has changed is my desktop
hardware - but the same printer, OS, and version of xsane.
Of course I have had to re-install my OS.
I can't remember now what I changed to make it work the
first time... but I have updated /etc/sane.d/hp.conf, and
added /etc/sane.d/hp6700.conf
saneimage -L shows
"# scanimage -L
device `v4l:/dev/video0' is a Noname UVC Camera (046d:0819) virtual device"
lsusb shows:
"# lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 1058:0810 Western Digital Technologies, Inc.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 003 Device 004: ID 0461:4e24 Primax Electronics, Ltd
Bus 003 Device 003: ID 046d:0819 Logitech, Inc. Webcam C210
Bus 003 Device 006: ID 0a5c:216c Broadcom Corp. <<<<<<<<<<<<<SCANNER
Bus 003 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub"
sane-find-scanner shows:
"# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0a5c [Broadcom Corp], product=0x216c
[BCM43142A0]) at libusb:003:006
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program."
xsane show only my webcam as a scanning device.
Any assistance would be greatly appreciated.
--
sane-devel mailing list: [email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
