On Fri, 2015-01-02 at 22:59 +0100, Martin wrote: > Hi Troels > > > *Is it USB3 (on the computer)? > no, it is USB2 > > *Do you have access to another computer, where you can try it - Does it > > work excactly the same strange way ... ? > No,I don't have access to another computer. But I have also Windows 7 > installed. With Windows 7 and the Canon-software it works OK. > > > *Does unit have ethernet connection / can you try that way? > Yes. With the ethernet connection the printer works. Thus the IP-address > below > is correct. > But I cannot access the scanner. > xsane pixma:MG7500_192.168.0.3 > results in the error message "illegal argument". Same thing with > scanimage --help -d bnjp://192.168.0.3:8612 Hi Martin If the scanner does not work on a USB port it is quite unlikely to work over the network: the bjnp network code just carries the USB exchange over IP. Anyhow, you can find the name with scanimage -L (but make sure that port 8612 is not blocked by a firewall (see the man-page for sane-pixma in the latest sources from GIT. you need to enable port 8612 for both incoming and outgoing traffic.
Louis -- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
