Hi,You could also try out Rolf Bensch's PPA which I use: https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git
Cheers,Ralph Subject: Re: [sane-devel] Cannon 9000f mark II To: "Zeb C." <[email protected]> Cc: [email protected] Date: Thursday, January 22, 2015, 6:24 PM Zeb C. writes: > Thanks Olaf > > I ran the command and my username was in the scanner group all > along. still no devices found. Sorry, I should have read the forum post more closely. FYI, your scanner was first supported in sane-backends-1.0.24.? That means you need libsane-1.0.24.? This version is available in utopic (Ubuntu 14.10).? Seeing that you are using trusty (Ubuntu 14.04), you have libsane-1.0.23 which does *not* support your scanner. You have two options: - upgrade to utopic (Ubuntu 14.10) - grab only libsane-1.0.24 and libsane-common from utopic (and if you ???have it installed maybe also sane-utils and/or libsane-extras) and ???install that Furthermore, if you haven't done so already, remove that 99-local.rules in /etc/udev/rules.d/.? It is very broken, causes the error on boot that you mentioned and is not needed with libsane-1.0.24. Hope this helps, -- Olaf Meeuwissen, LPIC-2? ? ? ? ???FLOSS Engineer -- AVASYS CORPORATION FSF Associate Member #1962? ? ? ? ? ? ???Help support software freedom ? ? ? ? ? ? ? ???http://www.fsf.org/jf?referrer=1962
-- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
