Hi Allan, Thank you very much for the patch. It's working now.
Much appreciated. Cheers, Leo On 23 March 2015 at 06:51, m. allan noah <[email protected]> wrote: > Leo- see if the attached patch will help. > > allan > > On Sat, Mar 21, 2015 at 9:53 PM, Gaggl, Leo <[email protected]> > wrote: > > Hi, > > > > I have installed sane on a RaspberryPi Model B > > http://www.splitbrain.org/blog/2014-08/23-paper_backup_1_scanner_setup > and > > followed all steps and the scanner is recognised fine. But when I try to > use > > scanimage the document starts feeding but then fails with > > > > scanimage: sane_start: Error during device I/O > > > > I have been updating firmware as there were some reports that the dwc_otg > > USB driver had some issues. Did you come across any issues like this ? > Any > > pointers would be much appreciated. Here is some more detailed debug > output > > > > > > [dll] sane_get_devices: found 1 devices > > [dll] sane_open: trying to open `epjitsu:libusb:001:004' > > [dll] sane_open: open successful > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=0) > > [dll] > > > sane_control_option(handle=0x1f438c0,option=0,action=0,value=0xbe81e71c,info=(nil)) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=0) > > [dll] > > > sane_control_option(handle=0x1f438c0,option=0,action=0,value=0xbe81c670,info=(nil)) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=1) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=2) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=3) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=4) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=5) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=6) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=7) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=8) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=9) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=10) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=11) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=12) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=13) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=14) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=15) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=16) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=17) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=18) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=19) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=20) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=21) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=22) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=23) > > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=24) > > [dll] sane_start(handle=0x1f438c0) > > scanimage: sane_start: Error during device I/O > > [dll] sane_cancel(handle=0x1f438c0) > > [dll] sane_close(handle=0x1f438c0) > > [dll] sane_exit: exiting > > > > Thanks in advance, > > Leo > > > > -- > > sane-devel mailing list: [email protected] > > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel > > Unsubscribe: Send mail with subject "unsubscribe your_password" > > to [email protected] > > > > -- > "well, I stand up next to a mountain- and I chop it down with the edge > of my hand" >
-- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
