On 11/19/2015 10:59 PM, Ronald Trask wrote:
I recently bought a Canoscan 9000 F Mark II scanner, I am running
Ubuntu 15.10. using both xsane transparency/slide setting, and the
command line options for scanning a transparency it appears that the
cover light is not illuminating. I uninstalled libsane that was
bundled with 15.10, and built / installed libsane 1.0.26 but it made
no difference. I verified proper function of the transparency scan
functionality with a windows lap top, so the issue is not with the
hardware. I attempted to attach the results of the a scan of some
slides, but the message was rejected, so message me if you think it
would be helpful to see the scanner's behavior. The left side of the
scan is totally black and gets auto cropped. The right side of the
scan is bright white, the actual slides are too dark to see. The xsane
frontend detects that cover for the transparency window is off, and
will not allow you to scan, I think a lot is working, but I am not
sure where to go from here.
One thing to note is that after I removed / purged the libsane that is
bundled with Ubuntu 15.10, and did a ldconfig -v | grep libsane it
showed only the 1.0.26 version of libsane. However, uninstalling
libsane also uninstalled xsane. When I did an apt-get install on
xsane, it evidently loaded 1.0.25 because running ldconfig shows both
versions installed. I really don't think that has any impact on the
issue though. I have not attempted it yet, but I assume I can fix that
by uninstalling xsane and libsane again and building the front end.
root>:/opt/sane/src/sane-backends# ldconfig -v | grep libsane
/sbin/ldconfig.real: Path `/lib/x86_64-linux-gnu' given more than once
/sbin/ldconfig.real: Path `/usr/lib/x86_64-linux-gnu' given more than once
/sbin/ldconfig.real: /lib/x86_64-linux-gnu/ld-2.21.so
<http://ld-2.21.so/>is the dynamic linker, ignoring
libsane.so.1 -> libsane.so.1.0.26
libsane.so.1 -> libsane.so.1.0.25
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Following the instructions I found at multiple locations, I did a git
clone and built it / installed it.
git clone git://git.debian.org/sane/sane-backends.git
root>:/opt/sane/src/sane-backends# export BACKENDS="canon pixma"
root>:/opt/sane/src/sane-backends# ./configure
root>:/opt/sane/src/sane-backends# make
root>:/opt/sane/src/sane-backends# make check
......
============================================================================
Testsuite summary for sane-backends 1.0.26git
============================================================================
# TOTAL: 5
# PASS: 5
# SKIP: 0
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
============================================================================
..........
================
All tests passed
================
root>:/opt/sane/src/sane-backends# make install
......
nothing looked unusual except
NOT overwriting canon.conf in /usr/local/etc/sane.d...
NOT overwriting pixma.conf in /usr/local/etc/sane.d...
NOT overwriting saned.conf in /usr/local/etc/sane.d...
NOT overwriting dll.conf in /usr/local/etc/sane.d...
........
root>:/opt/sane/src/sane-backends# ldconfig -v | grep libsane
/sbin/ldconfig.real: Path `/lib/x86_64-linux-gnu' given more than once
/sbin/ldconfig.real: Path `/usr/lib/x86_64-linux-gnu' given more than once
/sbin/ldconfig.real: /lib/x86_64-linux-gnu/ld-2.21.so
<http://ld-2.21.so/>is the dynamic linker, ignoring
libsane.so.1 -> libsane.so.1.0.26
libsane.so.1 -> libsane.so.1.0.25
Which I assume is the problem may be a problem ...
A lot seems to work.
scanimage -V
scanimage (sane-backends) 1.0.26git; backend version 1.0.26
scanimage --list-devices
device `pixma:04A9190D' is a CANON Canoscan 9000F Mark II
multi-function peripheral
--
sane-devel mailing list: [email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
