Just for further clarification,
I tried downloading the sane backends from debian experimental (1.0.27)
with no luck.
After download and building from the git repository, and setting
SANE_USB_WORKAROUND=0 it works (SANE_USB_WORKAROUND=1 does not work).
Thanks for the nudge in the right direction - I think I'm all set to go now.
-- Leon
On 07/29/2017 03:13 PM, Leon Hauck wrote:
Just tried that with no luck. Thanks for the tip though.
-- Leon
On 07/28/2017 08:32 PM, m. allan noah wrote:
You might try sane-backends 1.0.27, which includes the following
statement in its release notes:
Note 3: The Linux USB3 workaround which was added in version 1.0.25 is
now disabled by default. If you have difficulty using a scanner which
previously worked, or intermittent scanner availability, try setting
the new environment variable SANE_USB_WORKAROUND=1 before starting
your frontend.
On Fri, Jul 28, 2017 at 10:02 PM, Leon Hauck <l...@progcpu.net> wrote:
TLDR: are there any known issues using a Nikon Coolscan IV ED with
libusb 0.1.12-30 and kernel 4.9.0?
---------------------------------------
I'm trying to get an Coolscan IV ED (LS40) to work with Debian Stretch
(current stable release).
scanimage -L
properly identifies the scanner, however
scanimage > testme.pnm
hangs and eventually errors out due to an i/o error.
I connected this scanner to a laptop running the same software with
the same
results.
I connected the scanner to an older laptop running Debian Jessie
(previous
stable release), and it works fine, and I can also pass along additional
command line arguments for white balance, auto-focus, etc.
I'm guessing something may have changed in libusb and/or the kernel,
which
is preventing communication with this older USB1.1 unit.
Are there any known issues with this setup?
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org